About Conkling Park Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Conkling Park: Timberlake Fire Protection District 154.2800 MHz, narrow FM, no tone. Trunked: Idaho Cooperative Agencies Wireless Interoperable Network (ICAWIN), for example Kootenai County Fire talkgroup 28100 (hex 6dc4).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Idaho Cooperative Agencies Wireless Interoperable Network (ICAWIN): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Conkling Park, start with the Mason Butte (Worley) site of Idaho Cooperative Agencies Wireless Interoperable Network (ICAWIN), about 5 miles away. Its control channels: 771.98125, 773.66875, 774.65625 MHz.
Data updated .
Kootenai County channels that also cover Conkling Park
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Timberlake Fire Protection District | Fire Operations Bayview | 154.2800 | FMN | WNAD461 | |
| Timberlake Fire Protection District | Timberlake Fire Protection District – Dispatch | 154.3700 In 158.7750 | FMN | WQKY255 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Kootenai County Fire | Fire Alpha | 154.1150 | 179.9 PL | FMN | — |
Idaho Cooperative Agencies Wireless Interoperable Network (ICAWIN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Kootenai County Fire | Kootenai County Fire – Dispatch | 28100 | 6dc4 | D |
| Kootenai County Fire | Fire Operations | 28101 | 6dc5 | D |
| Kootenai County Fire | Fire Operations | 28102 | 6dc6 | D |
| Kootenai County Fire | Fire Operations | 28103 | 6dc7 | D |
| Kootenai County Fire | Fire Operations | 28104 | 6dc8 | D |
| Kootenai County Fire | Fire Operations | 28105 | 6dc9 | D |
| Kootenai County Fire | Fire Operations | 28106 | 6dca | D |
| Kootenai County Fire | Search & Rescue | 28900 | 70e4 | D |
Nearest trunked radio sites
Distances are measured from the center of Conkling Park.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Conkling Park?
We do not have a fire dispatch channel listed specifically for Conkling Park. The county-level fire dispatch channels in the same county: Timberlake Fire Protection District 154.2800 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Conkling Park?
Yes. The county-level systems that cover Conkling Park are Fire and EMS talkgroups are listed for Idaho Cooperative Agencies Wireless Interoperable Network (ICAWIN): 8 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Conkling Park?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Conkling Park?
For Conkling Park, start with the Mason Butte (Worley) site of Idaho Cooperative Agencies Wireless Interoperable Network (ICAWIN). Its control channels are 771.98125, 773.66875, 774.65625 MHz. Program a control channel first; the scanner finds the voice channels from it.