About Hagener Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Hagener: Cass County Sheriff / 911 157.5150 MHz, narrow FM, 411 DPL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Cass County channels that also cover Hagener
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cass County Sheriff / 911 | Cass County Sheriff / 911 – Paging – Countywide (Repeats 159.105) | 157.5150 | 411 DPL | FMN | — |
| Cass County Sheriff / 911 | Cass County Sheriff / 911 – Paging – Countywide | 159.1050 In 156.0000 | 411 DPL | FMN | WPOY929 |
Nearest trunked radio sites
Distances are measured from the center of Hagener.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Hagener?
We do not have a fire dispatch channel listed specifically for Hagener. The county-level fire dispatch channels in the same county: Cass County Sheriff / 911 157.5150 MHz, narrow FM, 411 DPL.
What scanner do I need to listen to fire and EMS in Hagener?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Hagener?
For Hagener, start with the Bluff Springs site of STARCOM21 Statewide Illinois. Its control channels are 770.66875, 774.03125, 860.8375 MHz. Program a control channel first; the scanner finds the voice channels from it.