Skip to content

Compromise Fire and EMS Frequencies

We do not have frequencies listed specifically for Compromise in Champaign County, Illinois yet. Countywide channels for Champaign County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Simulcast (Champaign County METCAD MDICE), about 14 miles away.

About Compromise Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Compromise: METCAD: 911 155.0400 MHz, narrow FM, 131.8 PL. County-level ems dispatch that covers Compromise: AMT East Ambulance (Champaign) 155.1150 MHz, narrow FM, CSQ; Arrow Ambulance (AMSEC) 151.3475 MHz, narrow FM, 118.8 PL. Trunked: Champaign County METCAD MDICE, for example Champaign County Fire talkgroup 22000 (hex 55f0).

  • 14 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Champaign County METCAD MDICE: 19 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Compromise, start with the Simulcast site of Champaign County METCAD MDICE, about 14 miles away. Its control channels: 852.5625, 853.1375, 853.525 MHz.
  • 5 listed entries are marked encrypted. No scanner can decode encrypted audio.

Data updated .

Champaign County channels that also cover Compromise

Fire Dispatch

Fire Dispatch frequencies for Champaign County
AgencyDescriptionFrequency (MHz)ToneModeFCC
METCAD: 911METCAD – 911 – Tone-Outs – Countywide155.0400131.8 PLFMNWQKD634

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Champaign County
AgencyDescriptionFrequency (MHz)ToneModeFCC
St. Joseph-Stanton Fire ProtectionStorm Spotters (179.9?)154.3550FMNWPFI885

EMS Dispatch

EMS Dispatch frequencies for Champaign County
AgencyDescriptionFrequency (MHz)ToneModeFCC
AMT East Ambulance (Champaign)AMT East Ambulance (Champaign) – Mobile Extenders (to SC21)155.1150CSQFMNWPWW442
AMT East Ambulance (Champaign) UnconfirmedAMT East Ambulance (Champaign) – Dispatch (Back-up)462.9500
In 467.9500
186.2 PLFMNWPWW442
Arrow Ambulance (AMSEC)Arrow Ambulance (AMSEC) – Dispatch Paging (and simulcasts of 155.04 METCAD Arrow pages)151.3475118.8 PLFMNWPTH211
Arrow Ambulance (AMSEC)Arrow Ambulance (AMSEC) – Dispatch Paging (and simulcasts of 155.04 METCAD Arrow pages)151.3475CSQFMNWPTH211
Arrow Ambulance (AMSEC)Arrow Ambulance (AMSEC) – Dispatch (DB – CECOM)159.0900
In 156.0900
88.5 PLFMN—
Arrow Ambulance (AMSEC)Arrow Dispatch – Douglas (Simulcasts 155.22)453.1750
In 458.1750
306 DPLFMNWPTH211
Arrow Ambulance (AMSEC)Arrow Champaign Backup / Airlife Paging462.9750
In 467.9750
179.9 PLFMNWPTH211

EMS Tactical

EMS Tactical frequencies for Champaign County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Illini Emergency Medical ServicesTalkabout (used during football game)158.8650CSQFMNKA75900

Hospitals & Medical

Hospitals & Medical frequencies for Champaign County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Arrow Ambulance (AMSEC)Patient Reports (Carle Hospital)155.3400186.2 PLFMN—
HospitalsPatient Reports (and statewide 210.7 PL)Patient Reports (OSF Heart of Mary Medical Center)155.3400186.2 PLFMNWNVT584
HospitalsPatient Reports (Carle)155.3400186.2 PLFMNWPWE589
HospitalsPatient Reports (OSF Heart of Mary Medical Center)155.4000FMNWNWC408

Champaign County METCAD MDICE

Champaign County METCAD MDICE talkgroups
AgencyDescriptionTalkgroupHexMode
Champaign County FireChampaign County Fire – Operations (CFD/UFD Responses)2200055f0D
Champaign County FireChampaign County Fire – Fire Ground2200555f5D
Champaign County FireChampaign County Fire – Fire Ground (County Fire Responses)2200655f6D
Champaign County FireChampaign County Fire – Countywide Dispatch2201255fcD
Champaign County FireChampaign County Fire – Fire Ground (Working Fires)2200255f2D
Champaign County FireChampaign County Fire – Fire Ground (Working Fires)2200355f3D
Champaign County FireChampaign County Fire – Fire Ground (Training)2200455f4D
Champaign County FireChampaign County Fire – Hazmat Operations2201055faD
Champaign County FireChampaign County Fire – Technical Rescue Operations2201155fbD
Champaign County FireChampaign County Fire – Command2201355fdD
EMS/HealthArrow EMS Operations 1 – Dispatch220165600D
EMS/HealthAMT East EMS Operations 1 – Dispatch220185602D
EMS/HealthIllini Emergency Medical Services2271758bdD
EMS/HealthEMS/Health – Mutual Aid2201555ffD
5 encrypted talkgroups (cannot be monitored)
Champaign County METCAD MDICE encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Champaign County FireChampaign County Fire – Command2201455feD Encrypted
EMS/HealthAMT East EMS – Command220215605D Encrypted
EMS/HealthArrow EMS Operations 2 – Operations220175601D Encrypted
EMS/HealthAMT East Operations 2 – Operations220195603D Encrypted
EMS/HealthArrow EMS – Command220205604D Encrypted

Nearest trunked radio sites

Distances are measured from the center of Compromise.

Simulcast · Champaign County METCAD MDICE
RFSS 1 · Site 1 (hex 1) · NAC 1D0 · about 14 mi away
Control 852.5625, 853.1375, 853.525, 853.825
Voice 851.0625, 851.55, 851.8, 852.1
Champaign · STARCOM21 Statewide Illinois
RFSS 2 · Site 3 (hex 3) · NAC 14C · about 16 mi away
Control 851.9375, 852.4625
Voice 851.4125, 852.9875, 854.9625, 855.1625
East Lynn · STARCOM21 Statewide Illinois
RFSS 2 · Site 5 (hex 5) · NAC 14A · about 18 mi away
Control 852.3375, 852.8625
Voice 851.8125, 855.7125, 857.2125, 859.3375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Compromise?

We do not have a fire dispatch channel listed specifically for Compromise. The county-level fire dispatch channels in the same county: METCAD: 911 155.0400 MHz, narrow FM, 131.8 PL.

What frequency does EMS or the ambulance service use in Compromise?

We do not have a EMS dispatch channel listed specifically for Compromise. The county-level EMS dispatch channels in the same county: AMT East Ambulance (Champaign) 155.1150 MHz, narrow FM, CSQ; Arrow Ambulance (AMSEC) 151.3475 MHz, narrow FM, 118.8 PL.

Do fire departments and EMS use a trunked radio system in Compromise?

Yes. The county-level systems that cover Compromise are Fire and EMS talkgroups are listed for Champaign County METCAD MDICE: 19 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Compromise?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Compromise?

For Compromise, start with the Simulcast site of Champaign County METCAD MDICE. Its control channels are 852.5625, 853.1375, 853.525, 853.825 MHz. Program a control channel first; the scanner finds the voice channels from it.