About Seven Hickory Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Seven Hickory: 911-CECOM/Sheriff/ESDA 158.8500 MHz, narrow FM, 506 DPL; Seven Hickory-Morgan Fire Protection District (Bushton) 154.1300 MHz, narrow FM, CSQ; Wabash Fire Protection District (Neoga/Mattoon) 155.8200 MHz, narrow FM, 88.5 PL.
- 11 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Coles County channels that also cover Seven Hickory
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| 911-CECOM/Sheriff/ESDA | 911 to Moultrie County Fire 151.4R | 158.8500 | 506 DPL | FMN | WQFP723 |
| 911-CECOM/Sheriff/ESDA | 911-CECOM/Sheriff/ESDA – Countywide Dispatch | 159.0900 In 156.0900 | 88.5 PL | FMN | KSC428 |
| Seven Hickory-Morgan Fire Protection District (Bushton) | Seven Hickory-Morgan Fire Protection District (Bushton) – Dispatch | 154.1300 | CSQ | FMN | — |
| Wabash Fire Protection District (Neoga/Mattoon) | Wabash Fire Protection District (Neoga/Mattoon) – Simulcast of all 159.09R-Countywide Fire Dispatch (Local for paging) | 155.8200 | 88.5 PL | FMN | WQBS672 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| 911-CECOM/Sheriff/ESDA | 911-CECOM/Sheriff/ESDA – Fire Ground | 154.2350 | CSQ | FMN | WQN849 |
| 911-CECOM/Sheriff/ESDA | Wabash/Neoga Fireground | 154.4300 | CSQ | FMN | — |
| Mitchell-Jerden Funeral Home/EMS (Mattoon) | Mitchell-Jerden Funeral Home/EMS (Mattoon) – Paging (on Wabash Fire) | 155.8200 | 88.5 PL | FMN | WQBS672 |
| Wabash Fire Protection District (Neoga/Mattoon) | Wabash Fire Protection District (Neoga/Mattoon) – Fire Ground | 155.1450 | 167.9 PL | FMN | — |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mitchell-Jerden Funeral Home/EMS (Mattoon) | Mitchell-Jerden Funeral Home/EMS (Mattoon) – Unit-to-Unit | 154.5150 In 159.5100 | 186.2 PL | FMN | WPOB837 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sarah Bush Lincoln Health Center (SBLHC Mattoon/Charleston) | Patient Reports (Mobiles) | 155.3400 | 100.0 PL | FMN | KVU370 |
| Sarah Bush Lincoln Health Center (SBLHC Mattoon/Charleston) | Patient Reports (Base) | 155.3400 | CSQ | FMN | KVU370 |
Nearest trunked radio sites
Distances are measured from the center of Seven Hickory.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Seven Hickory?
We do not have a fire dispatch channel listed specifically for Seven Hickory. The county-level fire dispatch channels in the same county: 911-CECOM/Sheriff/ESDA 158.8500 MHz, narrow FM, 506 DPL; Seven Hickory-Morgan Fire Protection District (Bushton) 154.1300 MHz, narrow FM, CSQ; Wabash Fire Protection District (Neoga/Mattoon) 155.8200 MHz, narrow FM, 88.5 PL.
What scanner do I need to listen to fire and EMS in Seven Hickory?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Seven Hickory?
For Seven Hickory, start with the Mattoon site of STARCOM21 Statewide Illinois. Its control channels are 851.9125, 852.4375, 852.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.