Skip to content

Spring Point Fire and EMS Frequencies

We do not have frequencies listed specifically for Spring Point in Cumberland County, Illinois yet. Countywide channels for Cumberland County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Effingham (STARCOM21 Statewide Illinois), about 11 miles away.

About Spring Point Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Spring Point: Cumberland County Fire 151.3100 MHz, DMR, CC 10 · TG 200 · SL 2.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Cumberland County channels that also cover Spring Point

Fire Dispatch

Fire Dispatch frequencies for Cumberland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cumberland County FireCumberland County Fire – Dispatch /Operations151.3100
In 158.7825
CC 10 · TG 200 · SL 2DMRWROM272
Cumberland County FireCumberland County Fire – Dispatch /Operations151.3100
In 158.7825
CC 10 · TG 800 · SL 2DMRWROM272
Cumberland County FireCumberland County Fire – Dispatch – Greenup, Toledo, Neoga Fire/Ambulance, Siegel, Montrose154.0850
In 154.7100
186.2 PLFMNKSC770
Cumberland County FireCumberland County Fire – Old Dispatch (rare use)155.5200
In 155.1900
186.2 PLFMNKSC770
Cumberland County FireCumberland County Fire – Dispatch / DTMF Siren Activation155.8650
In 154.7100
186.2 PLFMNKSC770
Cumberland County FireCumberland County Fire – Remote Receive Links/Voting System453.1625FMNKSC770

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Cumberland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cumberland County Fire911 – Water Tower (Alternate Fire/EMS/Police)159.2100
In 154.6500
FMNKSC770

Nearest trunked radio sites

Distances are measured from the center of Spring Point.

Effingham · STARCOM21 Statewide Illinois
RFSS 3 · Site 5 (hex 5) · NAC 140 · about 11 mi away
Control 852.1625, 852.6875, 853.6375
Voice 851.6375, 858.4875
Greenup · STARCOM21 Statewide Illinois
RFSS 3 · Site 50 (hex 32) · NAC 141 · about 11 mi away
Control 852.3125, 852.8375, 856.2125
Voice 851.475
Mattoon · STARCOM21 Statewide Illinois
RFSS 2 · Site 34 (hex 22) · NAC 149 · about 19 mi away
Control 851.9125, 852.4375, 852.9625
Voice 851.3875, 853.4875, 855.1875, 858.7375, 858.8625, 859.7375, 860.7375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Spring Point?

We do not have a fire dispatch channel listed specifically for Spring Point. The county-level fire dispatch channels in the same county: Cumberland County Fire 151.3100 MHz, DMR, CC 10 · TG 200 · SL 2.

What scanner do I need to listen to fire and EMS in Spring Point?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Spring Point?

For Spring Point, start with the Effingham site of STARCOM21 Statewide Illinois. Its control channels are 852.1625, 852.6875, 853.6375 MHz. Program a control channel first; the scanner finds the voice channels from it.