About Murdock Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Murdock: Douglas County Fire 154.1300 MHz, narrow FM, CSQ. County-level ems dispatch that covers Murdock: Arrow Medical Services Emergency Communications (AMSEC) 151.3475 MHz, narrow FM, CSQ. Trunked: STARCOM21 Statewide Illinois, for example Douglas County Fire talkgroup 5936 (hex 1730).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: STARCOM21 Statewide Illinois: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Murdock, start with the Pesotum site of STARCOM21 Statewide Illinois, about 12 miles away. Its control channels: 852.4125, 852.9375, 854.5625 MHz.
Data updated .
Douglas County channels that also cover Murdock
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Douglas County Fire | Douglas County Fire – Dispatch (for Broadlands-Champaign Co) | 154.1300 | CSQ | FMN | — |
| Douglas County Fire | Douglas County Fire – Countywide Dispatch | 154.1300 | 123.0 PL | FMN | — |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Arrow Medical Services Emergency Communications (AMSEC) | Arrow Medical Services Emergency Communications (AMSEC) – Paging – Future (Tuscola) | 151.3475 | CSQ | FMN | WPTH211 |
STARCOM21 Statewide Illinois
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Douglas County Fire | Douglas County Fire – Dispatch | 5936 | 1730 | D |
Nearest trunked radio sites
Distances are measured from the center of Murdock.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Murdock?
We do not have a fire dispatch channel listed specifically for Murdock. The county-level fire dispatch channels in the same county: Douglas County Fire 154.1300 MHz, narrow FM, CSQ.
What frequency does EMS or the ambulance service use in Murdock?
We do not have a EMS dispatch channel listed specifically for Murdock. The county-level EMS dispatch channels in the same county: Arrow Medical Services Emergency Communications (AMSEC) 151.3475 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Murdock?
Yes. The county-level systems that cover Murdock are Fire and EMS talkgroups are listed for STARCOM21 Statewide Illinois: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Murdock?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Murdock?
For Murdock, start with the Pesotum site of STARCOM21 Statewide Illinois. Its control channels are 852.4125, 852.9375, 854.5625 MHz. Program a control channel first; the scanner finds the voice channels from it.