Skip to content

Grandview Fire and EMS Frequencies

We do not have frequencies listed specifically for Grandview in Edgar County, Illinois yet. Countywide channels for Edgar County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Paris (STARCOM21 Statewide Illinois), about 7 miles away.

About Grandview Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Grandview: Edgar County Fire 151.3250 MHz, narrow FM, 032 DPL. County-level ems dispatch that covers Grandview: Edgar County Special Service Area Ambulance (Paris) 155.4000 MHz, narrow FM, 445 DPL.

  • 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Edgar County channels that also cover Grandview

Fire Dispatch

Fire Dispatch frequencies for Edgar County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Edgar County FireEdgar County Fire – Countywide Dispatch151.3250
In 158.9625
032 DPLFMNWPLS985
Edgar County FireEdgar County Fire – Remote Link (Tone Carrier at Paris)453.3500032 DPLFMNWPLS985
Edgar County FireEdgar County Fire – Remote Link (Paris)453.3750071 DPLFMNWPLS985
Edgar County FireEdgar County Fire – Remote Link (Tone Carrier at Brocton)453.5000032 DPLFMNWPLS985
Edgar County FireEdgar County Fire – Remote Link (heard Chrisman unit)458.3750071 DPLFMNWPLS985

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Edgar County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kansas Township FireKansas Township Fire – Fire Ground /Operations154.3400123.0 PLFMNKNIS711

EMS Dispatch

EMS Dispatch frequencies for Edgar County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Edgar County Special Service Area Ambulance (Paris)Edgar County Special Service Area Ambulance (Paris) – Old (rare use)155.4000445 DPLFMNWPXC499
Edgar County Special Service Area Ambulance (Paris) UnconfirmedEdgar County Special Service Area Ambulance (Paris) – Dispatch158.2425
In 153.0575
CC 13 · TG 1395 · SL 1DMRWQMB248

EMS Tactical

EMS Tactical frequencies for Edgar County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Horizon Health Hospital/EMS - ParisHorizon Health Hospital/EMS – Paris – Operations153.6500
In 159.7125
445 DPLFMNWQGL475

Hospitals & Medical

Hospitals & Medical frequencies for Edgar County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Horizon Health Hospital/EMS - ParisPatient Reports155.340088.5 PLFMNKVU371

Nearest trunked radio sites

Distances are measured from the center of Grandview.

Paris · STARCOM21 Statewide Illinois
RFSS 2 · Site 8 (hex 8) · NAC 144 · about 7 mi away
Control 852.325, 853.375, 853.95
Voice 856.9875, 857.2625, 857.9875, 858.9875, 859.9875, 860.9875
Martinsville · STARCOM21 Statewide Illinois
RFSS 3 · Site 54 (hex 36) · NAC 14F · about 15 mi away
Control 851.875, 852.4, 853.45
Voice 851.35, 852.925
Marshall · STARCOM21 Statewide Illinois
RFSS 3 · Site 36 (hex 24) · NAC 145 · about 18 mi away
Control 853.3375, 853.9125, 854.7125
Voice 851.45
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Grandview?

We do not have a fire dispatch channel listed specifically for Grandview. The county-level fire dispatch channels in the same county: Edgar County Fire 151.3250 MHz, narrow FM, 032 DPL.

What frequency does EMS or the ambulance service use in Grandview?

We do not have a EMS dispatch channel listed specifically for Grandview. The county-level EMS dispatch channels in the same county: Edgar County Special Service Area Ambulance (Paris) 155.4000 MHz, narrow FM, 445 DPL.

What scanner do I need to listen to fire and EMS in Grandview?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Grandview?

For Grandview, start with the Paris site of STARCOM21 Statewide Illinois. Its control channels are 852.325, 853.375, 853.95 MHz. Program a control channel first; the scanner finds the voice channels from it.