Skip to content

Rubicon Fire and EMS Frequencies

We do not have frequencies listed specifically for Rubicon in Greene County, Illinois yet. Countywide channels for Greene County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Beaver Dam State Park (STARCOM21 Statewide Illinois), about 16 miles away.

About Rubicon Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Rubicon: Greene County Fire 158.8425 MHz, narrow FM, 172 DPL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Greene County channels that also cover Rubicon

Fire Dispatch

Fire Dispatch frequencies for Greene County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Greene County FireGreene County Fire – Dispatch /Fireground (DB – West Central JDC 911)158.8425
In 156.0225
172 DPLFMNWQZU446

Nearest trunked radio sites

Distances are measured from the center of Rubicon.

Beaver Dam State Park · STARCOM21 Statewide Illinois
RFSS 3 · Site 7 (hex 7) · NAC 14C · about 16 mi away
Control 851.9, 852.425
Voice 851.375, 854.2125, 858.9625, 859.2125
Nilwood · STARCOM21 Statewide Illinois
RFSS 3 · Site 24 (hex 18) · NAC 14D · about 17 mi away
Control 770.69375, 774.45625, 774.80625
Voice 773.05625, 856.3375, 857.3375
Lynnville · STARCOM21 Statewide Illinois
RFSS 2 · Site 38 (hex 26) · NAC 14B · about 21 mi away
Control 851.8875, 852.4125, 852.9375
Voice 851.3625, 853.4625, 858.3375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Rubicon?

We do not have a fire dispatch channel listed specifically for Rubicon. The county-level fire dispatch channels in the same county: Greene County Fire 158.8425 MHz, narrow FM, 172 DPL.

What scanner do I need to listen to fire and EMS in Rubicon?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Rubicon?

For Rubicon, start with the Beaver Dam State Park site of STARCOM21 Statewide Illinois. Its control channels are 851.9, 852.425 MHz. Program a control channel first; the scanner finds the voice channels from it.