Skip to content

Walkerville Fire and EMS Frequencies

We do not have frequencies listed specifically for Walkerville in Greene County, Illinois yet. Countywide channels for Greene County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Kampsville / Mozier (STARCOM21 Statewide Illinois), about 10 miles away.

About Walkerville Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Walkerville: Greene County Fire 158.8425 MHz, narrow FM, 172 DPL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Greene County channels that also cover Walkerville

Fire Dispatch

Fire Dispatch frequencies for Greene County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Greene County FireGreene County Fire – Dispatch /Fireground (DB – West Central JDC 911)158.8425
In 156.0225
172 DPLFMNWQZU446

Nearest trunked radio sites

Distances are measured from the center of Walkerville.

Kampsville / Mozier · STARCOM21 Statewide Illinois
RFSS 3 · Site 52 (hex 34) · NAC 14F · about 10 mi away
Control 851.9375, 852.9875, 853.875
Voice 851.4125
Nebo · STARCOM21 Statewide Illinois
RFSS 3 · Site 38 (hex 26) · NAC 14E · about 11 mi away
Control 851.9625, 852.4875
Voice 851.4375, 853.9
Pleasant Hill · STARCOM21 Statewide Illinois
RFSS 2 · Site 35 (hex 23) · NAC 14A · about 20 mi away
Control 851.8625, 852.3875, 852.9125
Voice 851.3375, 853.4375, 856.3375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Walkerville?

We do not have a fire dispatch channel listed specifically for Walkerville. The county-level fire dispatch channels in the same county: Greene County Fire 158.8425 MHz, narrow FM, 172 DPL.

What scanner do I need to listen to fire and EMS in Walkerville?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Walkerville?

For Walkerville, start with the Kampsville / Mozier site of STARCOM21 Statewide Illinois. Its control channels are 851.9375, 852.9875, 853.875 MHz. Program a control channel first; the scanner finds the voice channels from it.