Skip to content

Crook Fire and EMS Frequencies

We do not have frequencies listed specifically for Crook in Hamilton County, Illinois yet. Countywide channels for Hamilton County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Carmi (STARCOM21 Statewide Illinois), about 12 miles away.

About Crook Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Crook: Hamilton County Fire 154.0700 MHz, narrow FM, no tone. County-level ems dispatch that covers Crook: Hamilton County EMS 154.2125 MHz, narrow FM, 74.4 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Hamilton County channels that also cover Crook

Fire Dispatch

Fire Dispatch frequencies for Hamilton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hamilton County FireHamilton County Fire – Dispatch (McLeansboro/Dahlgren)154.0700FMNWQHA802

EMS Dispatch

EMS Dispatch frequencies for Hamilton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hamilton County EMSHamilton County EMS – Dispatch154.212574.4 PLFMNKNIC505

Hospitals & Medical

Hospitals & Medical frequencies for Hamilton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hamilton Memorial Hospital (McLeansboro)Patients Reports155.3400FMNWNCD568

Nearest trunked radio sites

Distances are measured from the center of Crook.

Carmi · STARCOM21 Statewide Illinois
RFSS 3 · Site 8 (hex 8) · NAC 14A · about 12 mi away
Control 851.875, 852.4, 852.925
Voice 851.35, 853.45
Thompsonville · STARCOM21 Statewide Illinois
RFSS 3 · Site 45 (hex 2D) · NAC 14D · about 18 mi away
Control 851.975, 853.4
Voice 852.875, 853.8875, 858.3375
Herald · STARCOM21 Statewide Illinois
RFSS 3 · Site 35 (hex 23) · NAC 14F · about 20 mi away
Control 774.28125, 775.30625
Voice 770.95625, 773.29375, 773.56875, 774.29375, 774.53125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Crook?

We do not have a fire dispatch channel listed specifically for Crook. The county-level fire dispatch channels in the same county: Hamilton County Fire 154.0700 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Crook?

We do not have a EMS dispatch channel listed specifically for Crook. The county-level EMS dispatch channels in the same county: Hamilton County EMS 154.2125 MHz, narrow FM, 74.4 PL.

What scanner do I need to listen to fire and EMS in Crook?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Crook?

For Crook, start with the Carmi site of STARCOM21 Statewide Illinois. Its control channels are 851.875, 852.4, 852.925 MHz. Program a control channel first; the scanner finds the voice channels from it.