Skip to content

Rocky Run-Wilcox Fire and EMS Frequencies

We do not have frequencies listed specifically for Rocky Run-Wilcox in Hancock County, Illinois yet. Countywide channels for Hancock County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Warsaw (STARCOM21 Statewide Illinois), about 6 miles away.

About Rocky Run-Wilcox Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Rocky Run-Wilcox: Hancock County Fire 154.3850 MHz, narrow FM, 103.5 PL. County-level ems dispatch that covers Rocky Run-Wilcox: Hancock County EMS 158.9700 MHz, narrow FM, 173.8 PL.

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Hancock County channels that also cover Rocky Run-Wilcox

Fire Dispatch

Fire Dispatch frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hancock County FireHancock County Fire – Tone-Outs/Dispatch154.3850103.5 PLFMNWQAK851
Hancock County FireHancock County Fire – Tone-Outs/Dispatch154.3850118.8 PLFMNWQAK851
Hancock County FireHancock County Fire – Tone-Outs/Dispatch154.3850CSQFMNWQAK851
Hancock County FireHancock County Fire – Tone-Outs/Dispatch154.3850100.0 PLFMNWQAK851
Hancock County FireHancock County Fire – Tone-Outs/Dispatch154.3850127.3 PLFMNWQAK851

EMS Dispatch

EMS Dispatch frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hancock County EMSHancock County EMS – Dispatch (by Sheriff)158.9700173.8 PLFMNWYC790

Hospitals & Medical

Hospitals & Medical frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Memorial Hospital (Carthage)Patient Reports155.340091.5 PLFMNKSL965

Nearest trunked radio sites

Distances are measured from the center of Rocky Run-Wilcox.

Warsaw · STARCOM21 Statewide Illinois
RFSS 2 · Site 25 (hex 19) · NAC 144 · about 6 mi away
Control 852.35, 852.875, 853.4
Voice 851.825, 853.9, 853.975, 854.8375
Mendon · STARCOM21 Statewide Illinois
RFSS 2 · Site 33 (hex 21) · NAC 146 · about 13 mi away
Control 851.85, 852.375, 852.9
Voice 851.325, 853.425, 858.3375
Niota · STARCOM21 Statewide Illinois
RFSS 2 · Site 10 (hex A) · NAC 143 · about 25 mi away
Control 851.9, 852.425, 852.95
Voice 851.375, 852.475, 853.475, 855.2125, 856.7875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Rocky Run-Wilcox?

We do not have a fire dispatch channel listed specifically for Rocky Run-Wilcox. The county-level fire dispatch channels in the same county: Hancock County Fire 154.3850 MHz, narrow FM, 103.5 PL.

What frequency does EMS or the ambulance service use in Rocky Run-Wilcox?

We do not have a EMS dispatch channel listed specifically for Rocky Run-Wilcox. The county-level EMS dispatch channels in the same county: Hancock County EMS 158.9700 MHz, narrow FM, 173.8 PL.

What scanner do I need to listen to fire and EMS in Rocky Run-Wilcox?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Rocky Run-Wilcox?

For Rocky Run-Wilcox, start with the Warsaw site of STARCOM21 Statewide Illinois. Its control channels are 852.35, 852.875, 853.4 MHz. Program a control channel first; the scanner finds the voice channels from it.