Skip to content

Beaver Fire and EMS Frequencies

We do not have frequencies listed specifically for Beaver in Iroquois County, Illinois yet. Countywide channels for Iroquois County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Ashkum (STARCOM21 Statewide Illinois), about 20 miles away.

About Beaver Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Beaver: I-COM Fire 151.0625 MHz, narrow FM, 192.8 PL.

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Iroquois County channels that also cover Beaver

Fire Dispatch

Fire Dispatch frequencies for Iroquois County
AgencyDescriptionFrequency (MHz)ToneModeFCC
I-COM FireI-COM Fire – Paging /Dispatch – Countywide151.0625
In 156.0225
192.8 PLFMNWQCD920
I-COM FireI-COM Fire – Link to Remote 154.4 Towers (7 tones)458.3750110.9 PLFMNWQCR953

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Iroquois County
AgencyDescriptionFrequency (MHz)ToneModeFCC
I-COM FireI-COM Fire – Chit-Chat153.8150FMNWQCR953
I-COM FireI-COM Fire – Chit-Chat153.9650FMNWQCR953
I-COM FireI-COM Fire – Operations154.4000
In 159.4425
192.8 PLFMNWQCR953

Hospitals & Medical

Hospitals & Medical frequencies for Iroquois County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Iroquois Memorial Hospital (Watseka)Patient Reports155.3400192.8 PLFMNWSAL625

Nearest trunked radio sites

Distances are measured from the center of Beaver.

Ashkum · STARCOM21 Statewide Illinois
RFSS 2 · Site 50 (hex 32) · NAC 144 · about 20 mi away
Control 851.8625, 853.325, 856.2125
Voice 851.3375, 851.4375, 853.8875, 860.8375
Kankakee Co Simulcast · STARCOM21 Statewide Illinois
RFSS 2 · Site 48 (hex 30) · NAC 148 · about 23 mi away
Control 853.4375, 859.2625, 859.7625
Voice 852.4125, 852.9125, 853.9875, 854.5625, 856.7625, 857.4875, 858.2125, 858.7625
East Lynn · STARCOM21 Statewide Illinois
RFSS 2 · Site 5 (hex 5) · NAC 14A · about 32 mi away
Control 852.3375, 852.8625
Voice 851.8125, 855.7125, 857.2125, 859.3375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Beaver?

We do not have a fire dispatch channel listed specifically for Beaver. The county-level fire dispatch channels in the same county: I-COM Fire 151.0625 MHz, narrow FM, 192.8 PL.

What scanner do I need to listen to fire and EMS in Beaver?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Beaver?

For Beaver, start with the Ashkum site of STARCOM21 Statewide Illinois. Its control channels are 851.8625, 853.325, 856.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.