About Indian Grove Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Indian Grove: VCom - Fire/EMS 460.6000 MHz, narrow FM, 110.9 PL. Trunked: STARCOM21 Statewide Illinois, for example Livingston County Fire talkgroup 5780 (hex 1694).
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: STARCOM21 Statewide Illinois: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Indian Grove, start with the Pontiac site of STARCOM21 Statewide Illinois, about 12 miles away. Its control channels: 851.9625, 852.325, 852.85 MHz.
Data updated .
Livingston County channels that also cover Indian Grove
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| VCom - Fire/EMS | VCom – Fire/EMS – Paging Only (simulcast with SC21 5780) | 460.6000 In 465.6000 | 110.9 PL | FMN | WPFG740 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| VCom - Fire/EMS | VCom – Fire/EMS – Ground NW | 458.2000 | 107.2 PL | FMN | WPHX984 |
| VCom - Fire/EMS | VCom – Fire/EMS – Ground NE | 458.2500 | 107.2 PL | FMN | WPHX984 |
| VCom - Fire/EMS | VCom – Fire/EMS – Ground SW | 458.3000 | 107.2 PL | FMN | WPHX984 |
| VCom - Fire/EMS | VCom – Fire/EMS – Ground SE | 458.6250 | 107.2 PL | FMN | WPHX984 |
| VCom - Fire/EMS | VCom – Fire/EMS – Alternate | 462.9500 In 467.9500 | 103.5 PL | FMN | WPFG523 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| VCom - Fire/EMS | All Talk – Police/Fire – Common | 458.7750 | 173.8 PL | FMN | WPHX984 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| OSF St. James Hospital (Pontiac) | Patient Reports | 155.3400 | 118.8 PL | FMN | KNIK458 |
STARCOM21 Statewide Illinois
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Livingston County Fire | Livingston County Fire – Dispatch (multicast on 460.6) | 5780 | 1694 | D |
| Livingston County Fire | Livingston County Fire – Operations | 1907 | 773 | D |
| Livingston County Fire | Livingston County Fire – Operations | 1908 | 774 | D |
Nearest trunked radio sites
Distances are measured from the center of Indian Grove.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Indian Grove?
We do not have a fire dispatch channel listed specifically for Indian Grove. The county-level fire dispatch channels in the same county: VCom - Fire/EMS 460.6000 MHz, narrow FM, 110.9 PL.
Do fire departments and EMS use a trunked radio system in Indian Grove?
Yes. The county-level systems that cover Indian Grove are Fire and EMS talkgroups are listed for STARCOM21 Statewide Illinois: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Indian Grove?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Indian Grove?
For Indian Grove, start with the Pontiac site of STARCOM21 Statewide Illinois. Its control channels are 851.9625, 852.325, 852.85 MHz. Program a control channel first; the scanner finds the voice channels from it.