Skip to content

Bennington Fire and EMS Frequencies

We do not have frequencies listed specifically for Bennington in Marshall County, Illinois yet. Countywide channels for Marshall County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Toluca (E) (Marshall County Public Safety (IL)), about 3 miles away.

About Bennington Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Bennington: Marshall County Fire 154.3250 MHz, narrow FM, CSQ; Wyoming-Speer Fire 154.4450 MHz, narrow FM, 125 DPL. Trunked: Marshall County Public Safety (IL), for example Marshall County Fire talkgroup 629 (hex 275).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Marshall County Public Safety (IL): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.

Data updated .

Marshall County channels that also cover Bennington

Fire Dispatch

Fire Dispatch frequencies for Marshall County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Marshall County FireMarshall County Fire – Countywide Dispatch (Monitor All)154.3250
In 153.7700
CSQFMNKUE678
Marshall County FireMarshall County Fire – Countywide Repeater154.3250
In 153.7700
100.0 PLFMNKUE678
Marshall County FireMarshall County Fire – Response – Countywide154.8000
In 155.9700
100.0 PLFMNWPUT990
Wyoming-Speer FireWyoming-Speer Fire – Dispatch154.4450
In 150.8050
125 DPLFMNWPLX478

Marshall County Public Safety (IL)

Marshall County Public Safety (IL) talkgroups
AgencyDescriptionTalkgroupHexMode
Marshall County FireMarshall County Fire – Paging (Countywide)629275T

Nearest trunked radio sites

Distances are measured from the center of Bennington.

Toluca (E) · Marshall County Public Safety (IL)
Site 3 (hex 3) · about 3 mi away
Voice 460.4
Minonk · STARCOM21 Statewide Illinois
RFSS 2 · Site 59 (hex 3B) · NAC 140 · about 6 mi away
Control 854.5875, 857.0875
Voice 854.0125, 858.0875
Wenona (E) · Marshall County Public Safety (IL)
Site 4 (hex 4) · about 6 mi away
Voice 460.2875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Bennington?

We do not have a fire dispatch channel listed specifically for Bennington. The county-level fire dispatch channels in the same county: Marshall County Fire 154.3250 MHz, narrow FM, CSQ; Wyoming-Speer Fire 154.4450 MHz, narrow FM, 125 DPL.

Do fire departments and EMS use a trunked radio system in Bennington?

Yes. The county-level systems that cover Bennington are Fire and EMS talkgroups are listed for Marshall County Public Safety (IL): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Bennington?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Bennington?

For Bennington, start with the Minonk site of STARCOM21 Statewide Illinois. Its control channels are 854.5875, 857.0875 MHz. Program a control channel first; the scanner finds the voice channels from it.