Skip to content

Lake Petersburg Fire and EMS Frequencies

We do not have frequencies listed specifically for Lake Petersburg in Menard County, Illinois yet. Countywide channels for Menard County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Atterberry (STARCOM21 Statewide Illinois), about 6 miles away.

About Lake Petersburg Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Lake Petersburg: Athens-Fancy Prairie Fire Department 151.2200 MHz, narrow FM, 103.5 PL; Menard County Fire 151.1750 MHz, narrow FM, 503 DPL.

  • 11 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Menard County channels that also cover Lake Petersburg

Fire Dispatch

Fire Dispatch frequencies for Menard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Athens-Fancy Prairie Fire DepartmentAthens-Fancy Prairie Fire Department – Dispatch151.2200
In 159.4500
103.5 PLFMNWRUK220
Menard County FireMenard County Fire – Tone-Outs / Dispatch151.1750
In 154.7700
503 DPLFMNWQPW824
Menard County FireMenard County Fire – 911 Tx input to 151.175154.7700251 DPLFMNWQPW824
Menard County FireMenard County Fire – 911 Tx input to 151.175154.7700271 DPLFMNWQPW824
Menard County Fire911 – Remote Link – Petersburg (poss. 156.7)453.5500FMNWQFZ345
Menard County Fire911 – Remote Link – Petersburg453.8000FMNWQFZ345
Menard County Fire911 – Remote Link – Oakland458.3000FMNWQFZ345
Menard County Fire911 – Remote Link – Oakland458.5250343 DPLFMNWQFZ345

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Menard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Menard County FireESDA/Rescue Squad45.5600FMNWQBD562
Menard County FireMenard County Fire – Operations155.8050
In 153.8450
103.5 PLFMNWQBD562
Menard County FireMenard County Fire – Operations156.1650
In 154.0775
506 DPLFMNWQPW824

Nearest trunked radio sites

Distances are measured from the center of Lake Petersburg.

Atterberry · STARCOM21 Statewide Illinois
RFSS 2 · Site 32 (hex 20) · NAC 147 · about 6 mi away
Control 851.95, 852.475, 853.3125
Voice 851.425, 853.8875, 859.3625
Springfield · STARCOM21 Statewide Illinois
RFSS 2 · Site 30 (hex 1E) · NAC 14A · about 17 mi away
Control 852.325, 852.85, 853.375
Voice 851.1125, 851.4875, 852.075, 852.675, 857.3625, 858.2125
Sangamon Co Simulcast · STARCOM21 Statewide Illinois
RFSS 2 · Site 63 (hex 3F) · NAC 143 · about 19 mi away
Control 772.80625, 773.23125, 773.48125, 773.98125
Voice 771.98125, 772.23125, 772.53125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Lake Petersburg?

We do not have a fire dispatch channel listed specifically for Lake Petersburg. The county-level fire dispatch channels in the same county: Athens-Fancy Prairie Fire Department 151.2200 MHz, narrow FM, 103.5 PL; Menard County Fire 151.1750 MHz, narrow FM, 503 DPL.

What scanner do I need to listen to fire and EMS in Lake Petersburg?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Lake Petersburg?

For Lake Petersburg, start with the Atterberry site of STARCOM21 Statewide Illinois. Its control channels are 851.95, 852.475, 853.3125 MHz. Program a control channel first; the scanner finds the voice channels from it.