About Zanesville Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Zanesville: 911 / ETSB (M-COM) 151.4600 MHz, narrow FM, 162 DPL; Nokomis-Witt Area Ambulance Service 154.3250 MHz, narrow FM, 023 DPL; Raymond-Harvel Fire / Ambulance 154.3250 MHz, narrow FM, 85.4 PL.
- 11 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Montgomery County channels that also cover Zanesville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| 911 / ETSB (M-COM) | 911 / ETSB (M-COM) – Dispatch – Countywide // Outdoor Warning Sirens | 151.4600 In 155.9700 | 162 DPL | FMN | WQEM374 |
| 911 / ETSB (M-COM) | 911 / ETSB (M-COM) – Remote Link – Hillsboro | 453.2625 | 97.4 PL | FMN | WQEM374 |
| Nokomis-Witt Area Ambulance Service | Nokomis-Witt Area Ambulance Service – Paging /Dispatch (Nokomis, Raymond?) | 154.3250 | 023 DPL | FMN | WPHP582 |
| Nokomis-Witt Area Ambulance Service | Nokomis-Witt Area Ambulance Service – Dispatch Nokomis/Witt (rpts 154.325 D023) | 159.8475 In 152.9825 | 223 DPL | FMN | WQFE421 |
| Raymond-Harvel Fire / Ambulance | Raymond-Harvel Fire / Ambulance – Paging /Dispatch – Raymond-Harvel | 154.3250 | 85.4 PL | FMN | KTY953 |
| Raymond-Harvel Fire / Ambulance | 911 Simulcast – Raymond (Hillsboro) | 159.6375 In 151.9175 | 266 DPL | FMN | WQFE421 |
| Raymond-Harvel Fire / Ambulance | Raymond-Harvel Fire / Ambulance – Mobile Extenders | 173.2875 | CSQ | FMN | KTY953 |
| Shoal Creek Fire and Rescue (Panama) | Shoal Creek Fire and Rescue (Panama) – Dispatch (DB – Bond Co 911) | 154.1300 In 154.3250 | 162.2 PL | FMN | WPJX755 |
| Shoal Creek Fire and Rescue (Panama) | Shoal Creek Fire and Rescue (Panama) – Paging /Dispatch | 159.8325 In 152.9625 | 506 DPL | FMN | WQFE421 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hillsboro Health (Hospital) | Patient Reports | 155.3400 | 118.8 PL | FMN | WPXN413 |
| HSHS St. Francis Hospital - Litchfield | Patient Reports | 155.3400 | 85.4 PL | FMN | WPMU226 |
Nearest trunked radio sites
Distances are measured from the center of Zanesville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Zanesville?
We do not have a fire dispatch channel listed specifically for Zanesville. The county-level fire dispatch channels in the same county: 911 / ETSB (M-COM) 151.4600 MHz, narrow FM, 162 DPL; Nokomis-Witt Area Ambulance Service 154.3250 MHz, narrow FM, 023 DPL; Raymond-Harvel Fire / Ambulance 154.3250 MHz, narrow FM, 85.4 PL; Shoal Creek Fire and Rescue (Panama) 154.1300 MHz, narrow FM, 162.2 PL.
What scanner do I need to listen to fire and EMS in Zanesville?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Zanesville?
For Zanesville, start with the Nilwood site of STARCOM21 Statewide Illinois. Its control channels are 770.69375, 774.45625, 774.80625 MHz. Program a control channel first; the scanner finds the voice channels from it.