About Flagg Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Flagg: Ogle County 911 154.1600 MHz, narrow FM, 156.7 PL; Ogle County Fire 155.1000 MHz, narrow FM, 123.0 PL. Trunked: STARCOM21 Statewide Illinois, for example Ogle County Fire talkgroup 1043 (hex 413).
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: STARCOM21 Statewide Illinois: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Flagg, start with the Ashton site of STARCOM21 Statewide Illinois, about 8 miles away. Its control channels: 852.2125, 853.1875, 853.8375 MHz.
Data updated .
Ogle County channels that also cover Flagg
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ogle County 911 | Ogle County 911 – Dispatch – East | 154.1600 | 156.7 PL | FMN | WNYA541 |
| Ogle County 911 | Ogle County 911 – Dispatch – West | 154.1900 | FMN | WNYA541 | |
| Ogle County 911 | Ogle County 911 – Dispatch | 154.3400 | 156.7 PL | FMN | WNYA541 |
| Ogle County Fire | Countywide Police/Fire – Backup | 155.1000 In 150.7750 | 123.0 PL | FMN | WPJS873 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ogle County 911 | Ogle County 911 – Fire Ground – Countywide | 154.3850 | CSQ | FMN | WPKI712 |
| Ogle-Lee Fire Protection District (Creston/Oregon) | Ogle-Lee Fire Protection District (Creston/Oregon) – Private | 151.7600 | CSQ | FMN | — |
| Ogle-Lee Fire Protection District (Creston/Oregon) | Ogle-Lee Fire Protection District (Creston/Oregon) – Dispatch | 154.1750 | 654 DPL | FMN | WPRF283 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rochelle Community Hospital | Patient Reports | 155.3400 | 156.7 PL | FMN | WQBG623 |
STARCOM21 Statewide Illinois
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Ogle County Fire | Ogle Fire | 1043 | 413 | D |
| Ogle County Fire | Ogle Fire | 1044 | 414 | D |
| Ogle County EMS | Ogle EMS | 1045 | 415 | D |
| Ogle County EMS | Ogle EMS | 1046 | 416 | D |
Nearest trunked radio sites
Distances are measured from the center of Flagg.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Flagg?
We do not have a fire dispatch channel listed specifically for Flagg. The county-level fire dispatch channels in the same county: Ogle County 911 154.1600 MHz, narrow FM, 156.7 PL; Ogle County Fire 155.1000 MHz, narrow FM, 123.0 PL.
Do fire departments and EMS use a trunked radio system in Flagg?
Yes. The county-level systems that cover Flagg are Fire and EMS talkgroups are listed for STARCOM21 Statewide Illinois: 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Flagg?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Flagg?
For Flagg, start with the Ashton site of STARCOM21 Statewide Illinois. Its control channels are 852.2125, 853.1875, 853.8375 MHz. Program a control channel first; the scanner finds the voice channels from it.