Skip to content

Holcomb Fire and EMS Frequencies

We do not have frequencies listed specifically for Holcomb in Ogle County, Illinois yet. Countywide channels for Ogle County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Oregon (STARCOM21 Statewide Illinois), about 13 miles away.

About Holcomb Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Holcomb: Ogle County 911 154.1600 MHz, narrow FM, 156.7 PL; Ogle County Fire 155.1000 MHz, narrow FM, 123.0 PL. Trunked: STARCOM21 Statewide Illinois, for example Ogle County Fire talkgroup 1043 (hex 413).

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: STARCOM21 Statewide Illinois: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Holcomb, start with the Oregon site of STARCOM21 Statewide Illinois, about 13 miles away. Its control channels: 852.925, 853.45, 860.2125 MHz.

Data updated .

Ogle County channels that also cover Holcomb

Fire Dispatch

Fire Dispatch frequencies for Ogle County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ogle County 911Ogle County 911 – Dispatch – East154.1600156.7 PLFMNWNYA541
Ogle County 911Ogle County 911 – Dispatch – West154.1900FMNWNYA541
Ogle County 911Ogle County 911 – Dispatch154.3400156.7 PLFMNWNYA541
Ogle County FireCountywide Police/Fire – Backup155.1000
In 150.7750
123.0 PLFMNWPJS873

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Ogle County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ogle County 911Ogle County 911 – Fire Ground – Countywide154.3850CSQFMNWPKI712
Ogle-Lee Fire Protection District (Creston/Oregon)Ogle-Lee Fire Protection District (Creston/Oregon) – Private151.7600CSQFMN—
Ogle-Lee Fire Protection District (Creston/Oregon)Ogle-Lee Fire Protection District (Creston/Oregon) – Dispatch154.1750654 DPLFMNWPRF283

Hospitals & Medical

Hospitals & Medical frequencies for Ogle County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rochelle Community HospitalPatient Reports155.3400156.7 PLFMNWQBG623

STARCOM21 Statewide Illinois

STARCOM21 Statewide Illinois talkgroups
AgencyDescriptionTalkgroupHexMode
Ogle County FireOgle Fire1043413D
Ogle County FireOgle Fire1044414D
Ogle County EMSOgle EMS1045415D
Ogle County EMSOgle EMS1046416D

Nearest trunked radio sites

Distances are measured from the center of Holcomb.

Oregon · STARCOM21 Statewide Illinois
RFSS 1 · Site 32 (hex 20) · NAC 14E · about 13 mi away
Control 852.925, 853.45, 860.2125
Voice 851.35, 860.7125
Creston · STARCOM21 Statewide Illinois
RFSS 1 · Site 36 (hex 24) · NAC 149 · about 13 mi away
Control 773.15625, 773.56875, 774.59375
Voice 770.16875, 773.73125, 774.81875
Rockford - Simulcast · STARCOM21 Statewide Illinois
RFSS 1 · Site 11 (hex B) · NAC 143 · about 16 mi away
Control 851.4125, 852.3875, 853.3875
Voice 851.2625, 851.7125, 852.0375, 852.8375, 853.2375, 853.6375, 853.8875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Holcomb?

We do not have a fire dispatch channel listed specifically for Holcomb. The county-level fire dispatch channels in the same county: Ogle County 911 154.1600 MHz, narrow FM, 156.7 PL; Ogle County Fire 155.1000 MHz, narrow FM, 123.0 PL.

Do fire departments and EMS use a trunked radio system in Holcomb?

Yes. The county-level systems that cover Holcomb are Fire and EMS talkgroups are listed for STARCOM21 Statewide Illinois: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Holcomb?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Holcomb?

For Holcomb, start with the Oregon site of STARCOM21 Statewide Illinois. Its control channels are 852.925, 853.45, 860.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.