Skip to content

Senachwine Fire and EMS Frequencies

We do not have frequencies listed specifically for Senachwine in Putnam County, Illinois yet. Countywide channels for Putnam County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Henry (N) (Marshall County Public Safety (IL)), about 6 miles away.

About Senachwine Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Senachwine: Hennipin Fire 155.2200 MHz, narrow FM, no tone; Putnam County Fire 150.9950 MHz, narrow FM, 100.0 PL. Trunked: Putnam County, for example Putnam County Fire talkgroup 2010 (hex 7da).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Putnam County: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.

Data updated .

Putnam County channels that also cover Senachwine

Fire Dispatch

Fire Dispatch frequencies for Putnam County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hennipin FireHennipin Fire – Operations155.2200FMNKNBY450
Putnam County FireFire/EMS/ESDA – Paging / Operations150.9950
In 153.8750
100.0 PLFMNWPXH347

Putnam County

Putnam County talkgroups
AgencyDescriptionTalkgroupHexMode
Putnam County FireFire and EMS Dispatch (dispatch only – no responses)20107daT

Nearest trunked radio sites

Distances are measured from the center of Senachwine.

Henry (N) · Marshall County Public Safety (IL)
Site 5 (hex 5) · about 6 mi away
Voice 460.2125
Hennepin · Putnam County
Site 1 (hex 1) · about 6 mi away
Voice 453.1625
Granville (Clearview) · Putnam County
Site 3 (hex 3) · about 8 mi away
Voice 453.525

Common questions

What frequency does the fire department use in Senachwine?

We do not have a fire dispatch channel listed specifically for Senachwine. The county-level fire dispatch channels in the same county: Hennipin Fire 155.2200 MHz, narrow FM, no tone; Putnam County Fire 150.9950 MHz, narrow FM, 100.0 PL.

Do fire departments and EMS use a trunked radio system in Senachwine?

Yes. The county-level systems that cover Senachwine are Fire and EMS talkgroups are listed for Putnam County: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Senachwine?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.