Skip to content

Denver Fire and EMS Frequencies

We do not have frequencies listed specifically for Denver in Richland County, Illinois yet. Countywide channels for Richland County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Newton (STARCOM21 Statewide Illinois), about 11 miles away.

About Denver Fire and EMS Frequencies

Quick answer: Trunked: STARCOM21 Statewide Illinois, for example Richland County EMS talkgroup 5332 (hex 14d4).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: STARCOM21 Statewide Illinois: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Denver, start with the Newton site of STARCOM21 Statewide Illinois, about 11 miles away. Its control channels: 851.8625, 852.3875, 852.9125 MHz.

Data updated .

Richland County channels that also cover Denver

Hospitals & Medical

Hospitals & Medical frequencies for Richland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Richland Memorial Hospital / EMS (Olney)Patient Reports155.3400136.5 PLFMNWSZ402

STARCOM21 Statewide Illinois

STARCOM21 Statewide Illinois talkgroups
AgencyDescriptionTalkgroupHexMode
Richland County EMSRichland County EMS – Dispatch – Arrow South (Richland/Champaign)533214d4D

Nearest trunked radio sites

Distances are measured from the center of Denver.

Newton · STARCOM21 Statewide Illinois
RFSS 3 · Site 13 (hex D) · NAC 142 · about 11 mi away
Control 851.8625, 852.3875, 852.9125
Voice 851.3375, 853.4375
Flora · STARCOM21 Statewide Illinois
RFSS 3 · Site 46 (hex 2E) · NAC 147 · about 20 mi away
Control 851.8375, 852.3625, 859.2125
Voice 851.3125
Sumner · STARCOM21 Statewide Illinois
RFSS 3 · Site 2 (hex 2) · NAC 148 · about 21 mi away
Control 851.9125, 853.4875
Voice 851.3875, 855.2125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do fire departments and EMS use a trunked radio system in Denver?

Yes. The county-level systems that cover Denver are Fire and EMS talkgroups are listed for STARCOM21 Statewide Illinois: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Denver?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Denver?

For Denver, start with the Newton site of STARCOM21 Statewide Illinois. Its control channels are 851.8625, 852.3875, 852.9125 MHz. Program a control channel first; the scanner finds the voice channels from it.