About Blackhawk Fire and EMS Frequencies
Quick answer: Fire dispatch for Blackhawk: Blackhawk Fire Protection District 154.1600 MHz, narrow FM, 244 DPL.
- 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Blackhawk conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Blackhawk Fire Protection District | Blackhawk Fire Protection District – Dispatch (patch to RACOM 490) | 154.1600 | 244 DPL | FMN | KCQ290 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Blackhawk Fire | Blackhawk Fire – Local Alternate | 159.1050 | FMN | WNZM450 |
Rock Island County channels that also cover Blackhawk
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| 911 / RICOMM | 911 / RICOMM – Dispatch (Port Byron/Coal Valley R's) | 154.3100 In 158.9850 | 134 DPL | FMN | KUK421 |
| 911 / RICOMM | 911 / RICOMM – Countywide Dispatch | 154.3100 | 134 DPL | FMN | WNIP898 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| 911 / RICOMM | 911 / RICOMM – Dispatch / ESDA | 154.9800 In 156.0300 | 732 DPL | FMN | KDD967 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hospital - Patient Reports | Patient Reports-Illini Campus (Silvis) (also 179.9?) | 155.3400 | 110.9 PL | FMN | KWK449 |
| Hospital - Patient Reports | Patient Reports-Trinity East (Moline)/West (Rock Island) | 155.3400 | 179.9 PL | FMN | WSLX903 |
| Hospital - Patient Reports | Patient Reports-Illini Campus (Silvis) | 155.4000 | FMN | KWK449 | |
| Hospital - Patient Reports | Patient Reports-Trinity East (Moline) | 463.1250 In 468.1250 | 179.9 PL | FMN | WNXK282 |
Nearest trunked radio sites
Distances are measured from the center of Blackhawk.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Blackhawk?
Fire dispatch channels listed for Blackhawk: Blackhawk Fire Protection District 154.1600 MHz, narrow FM, 244 DPL.
What scanner do I need to listen to fire and EMS in Blackhawk?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Blackhawk?
For Blackhawk, start with the Rock Island site of STARCOM21 Statewide Illinois. Its control channels are 852.325 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Blackhawk fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Blackhawk are marked encrypted.