Skip to content

Independence Fire and EMS Frequencies

We do not have frequencies listed specifically for Independence in Saline County, Illinois yet. Countywide channels for Saline County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Herod (STARCOM21 Statewide Illinois), about 6 miles away.

About Independence Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Independence: Central Dispatch (911 / ETSB) 151.2050 MHz, narrow FM, 97.4 PL. County-level ems dispatch that covers Independence: Central Dispatch (911 / ETSB) 155.7750 MHz, narrow FM, 146.2 PL.

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Saline County channels that also cover Independence

Fire Dispatch

Fire Dispatch frequencies for Saline County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Central Dispatch (911 / ETSB)Central Dispatch (911 / ETSB) – Paging / Dispatch – (Akin-Franklin/Hamilton)151.2050
In 153.7550
97.4 PLFMNWQDF217
Central Dispatch (911 / ETSB)Central Dispatch (911 / ETSB) – Dispatch (with Gallatin)154.0700CSQFMNWNWY314

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Saline County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Central Dispatch (911 / ETSB)Central Dispatch (911 / ETSB) – Fire Ground – Countywide154.3400FMNWNWY314

EMS Dispatch

EMS Dispatch frequencies for Saline County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Central Dispatch (911 / ETSB)Saline/Gallatin/Miller EMS – Dispatch (also ARCH LZ)155.7750146.2 PLFMNWNYR595

Hospitals & Medical

Hospitals & Medical frequencies for Saline County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ferrel Hospital (Eldorado)Patient Reports (may see 100.0)155.3400CSQFMNKNEN564
SIH Harrisburg Medical CenterPatient Reports (may see 131.8)155.3400CSQFMNKYC251

Nearest trunked radio sites

Distances are measured from the center of Independence.

Herod · STARCOM21 Statewide Illinois
RFSS 3 · Site 19 (hex 13) · NAC 142 · about 6 mi away
Control 852.9875, 853.9
Voice 852.4875, 853.325, 856.2125, 859.3375
Equality · STARCOM21 Statewide Illinois
RFSS 3 · Site 47 (hex 2F) · NAC 14E · about 13 mi away
Control 852.3625, 853.875
Voice 851.8375, 860.8375
North Golconda · STARCOM21 Statewide Illinois
RFSS 3 · Site 57 (hex 39) · NAC 14C · about 18 mi away
Control 851.85, 852.375
Voice 851.325
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Independence?

We do not have a fire dispatch channel listed specifically for Independence. The county-level fire dispatch channels in the same county: Central Dispatch (911 / ETSB) 151.2050 MHz, narrow FM, 97.4 PL.

What frequency does EMS or the ambulance service use in Independence?

We do not have a EMS dispatch channel listed specifically for Independence. The county-level EMS dispatch channels in the same county: Central Dispatch (911 / ETSB) 155.7750 MHz, narrow FM, 146.2 PL.

What scanner do I need to listen to fire and EMS in Independence?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Independence?

For Independence, start with the Herod site of STARCOM21 Statewide Illinois. Its control channels are 852.9875, 853.9 MHz. Program a control channel first; the scanner finds the voice channels from it.