Skip to content

Riggston Fire and EMS Frequencies

We do not have frequencies listed specifically for Riggston in Scott County, Illinois yet. Countywide channels for Scott County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Lynnville (STARCOM21 Statewide Illinois), about 5 miles away.

About Riggston Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Riggston: North Scott Fire Protection District (Bluffs) 154.2200 MHz, narrow FM, no tone; Scott County Fire 151.0850 MHz, narrow FM, no tone.

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Scott County channels that also cover Riggston

Fire Dispatch

Fire Dispatch frequencies for Scott County
AgencyDescriptionFrequency (MHz)ToneModeFCC
North Scott Fire Protection District (Bluffs)North Scott Fire Protection District (Bluffs) – Dispatch154.2200FMNWPIE263
North Scott Fire Protection District (Bluffs)North Scott Fire Protection District (Bluffs) – Paging / Dispatch154.445082.5 PLFMNWPQH278
Scott County FireScott County Fire – Dispatch – New151.0850
In 155.5275
FMNWSIK454
Scott County FireScott County Fire – Dispatch (DB 911)154.3850
In 150.7750
77.0 PLFMNWPWI269
Scott County Fire911 – Remote Link to 154.385R (Naples)453.1750CSQFMNWPWI269
Scott County Fire911 – Remote Link to 154.385R (Naples)453.1750032 DPLFMNWPWI269
Scott County Fire911 – Remote Link to 154.385R (Manchester)453.7500CSQFMNWPWI269
Scott County Fire911 – Remote Link to 154.385R458.9875CSQFMNWPLT855

Nearest trunked radio sites

Distances are measured from the center of Riggston.

Lynnville · STARCOM21 Statewide Illinois
RFSS 2 · Site 38 (hex 26) · NAC 14B · about 5 mi away
Control 851.8875, 852.4125, 852.9375
Voice 851.3625, 853.4625, 858.3375
Pittsfield · STARCOM21 Statewide Illinois
RFSS 2 · Site 19 (hex 13) · NAC 149 · about 23 mi away
Control 852.3375, 852.8625, 853.3875
Voice 851.8125, 853.9625, 855.3625
Bluff Springs · STARCOM21 Statewide Illinois
RFSS 2 · Site 9 (hex 9) · NAC 14C · about 23 mi away
Control 770.66875, 774.03125, 860.8375
Voice 769.96875, 858.8375, 860.8875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Riggston?

We do not have a fire dispatch channel listed specifically for Riggston. The county-level fire dispatch channels in the same county: North Scott Fire Protection District (Bluffs) 154.2200 MHz, narrow FM, no tone; Scott County Fire 151.0850 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Riggston?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Riggston?

For Riggston, start with the Lynnville site of STARCOM21 Statewide Illinois. Its control channels are 851.8875, 852.4125, 852.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.