Skip to content

Holland Fire and EMS Frequencies

We do not have frequencies listed specifically for Holland in Shelby County, Illinois yet. Countywide channels for Shelby County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Lakewood/Williamsburg Hill (STARCOM21 Statewide Illinois), about 11 miles away.

About Holland Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Holland: Shelby County Fire 154.4300 MHz, narrow FM, CSQ.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Shelby County channels that also cover Holland

Fire Dispatch

Fire Dispatch frequencies for Shelby County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Shelby County FireShelby County Fire – Fire Ground (Old Countywide Dispatch)154.4300CSQFMN—
Shelby County FireShelby County Fire – Dispatch / Sheriff – Interagency155.5800
In 159.0300
203.5 PLFMNKSB926
Shelby County FireMABAS Division 54159.2775245 DPLFMNWQPE997

Hospitals & Medical

Hospitals & Medical frequencies for Shelby County
AgencyDescriptionFrequency (MHz)ToneModeFCC
HSHS Good Shepherd Hospital (Shelbyville)Patient Reports155.3400FMNKXO701

Nearest trunked radio sites

Distances are measured from the center of Holland.

Lakewood/Williamsburg Hill · STARCOM21 Statewide Illinois
RFSS 2 · Site 26 (hex 1A) · NAC 148 · about 11 mi away
Control 852.35, 852.875, 853.4
Voice 851.825, 853.975
Effingham · STARCOM21 Statewide Illinois
RFSS 3 · Site 5 (hex 5) · NAC 140 · about 14 mi away
Control 852.1625, 852.6875, 853.6375
Voice 851.6375, 858.4875
Mason · STARCOM21 Statewide Illinois
RFSS 3 · Site 27 (hex 1B) · NAC 143 · about 20 mi away
Control 851.4125, 852.9875, 853.875
Voice 852.4625, 860.8875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Holland?

We do not have a fire dispatch channel listed specifically for Holland. The county-level fire dispatch channels in the same county: Shelby County Fire 154.4300 MHz, narrow FM, CSQ.

What scanner do I need to listen to fire and EMS in Holland?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Holland?

For Holland, start with the Lakewood/Williamsburg Hill site of STARCOM21 Statewide Illinois. Its control channels are 852.35, 852.875, 853.4 MHz. Program a control channel first; the scanner finds the voice channels from it.