Skip to content

Bolo Fire and EMS Frequencies

We do not have frequencies listed specifically for Bolo in Washington County, Illinois yet. Countywide channels for Washington County that may also cover this area are shown below when we have them. The closest trunked radio site we have is DuQuoin (STARCOM21 Statewide Illinois), about 19 miles away.

About Bolo Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Bolo: Coulterville Community Fire Protection District (Oakdale) 154.1450 MHz, narrow FM, CSQ; Washington County Fire 151.1525 MHz, narrow FM, CSQ. County-level ems dispatch that covers Bolo: Washington County Paramedics (Nashville) 155.0850 MHz, P25, NAC 294. Trunked: STARCOM21 Statewide Illinois, for example Washington County EMS talkgroup 5378 (hex 1502).

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: STARCOM21 Statewide Illinois: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Bolo, start with the DuQuoin site of STARCOM21 Statewide Illinois, about 19 miles away. Its control channels: 852.4375, 852.9625 MHz.

Data updated .

Washington County channels that also cover Bolo

Fire Dispatch

Fire Dispatch frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Coulterville Community Fire Protection District (Oakdale)Coulterville Community Fire Protection District (Oakdale) – Dispatch (Oakdale) (DB – Sparta "WNVK861")154.1450CSQFMNWQEY476
Washington County FireWashington County Fire – Tone Only151.1525CSQFMNWQRI358
Washington County FireWashington County Fire – Tone-Outs/Dispatch (Countywide)151.1525114 DPLFMNWQRI358
Washington County Fire BackupWashington County Fire – Dispatch (Countywide)154.4300114 DPLFMNKFM399
Washington County FireWashington County Fire – Remote Link173.3325CSQFMN—
Washington County FireWashington County Fire – Remote Link (may be other tones)453.400094.8 PLFMNWQRI358

EMS Dispatch

EMS Dispatch frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County Paramedics (Nashville)Washington County Paramedics (Nashville) – Dispatcher155.0850NAC 294P25KFM399
Washington County Paramedics (Nashville)Washington County Paramedics (Nashville) – Mobiles-to-Dispatch155.0850NAC 294P25KFM399

Hospitals & Medical

Hospitals & Medical frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
SSM Washington County Hospital (Nashville)Patient Reports155.340094.8 PLFMNKXG919

STARCOM21 Statewide Illinois

STARCOM21 Statewide Illinois talkgroups
AgencyDescriptionTalkgroupHexMode
Washington County EMSWashington County EMS – Dispatch53781502D

Nearest trunked radio sites

Distances are measured from the center of Bolo.

DuQuoin · STARCOM21 Statewide Illinois
RFSS 3 · Site 18 (hex 12) · NAC 140 · about 19 mi away
Control 852.4375, 852.9625
Voice 851.9125, 855.3625, 858.9125
Good Samaritan Hospital · Mt Vernon IL Public Safety
Site 3 (hex 3) · about 21 mi away
Voice 151.295
Water Tower · Mt Vernon IL Public Safety
Site 2 (hex 2) · about 21 mi away
Voice 154.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Bolo?

We do not have a fire dispatch channel listed specifically for Bolo. The county-level fire dispatch channels in the same county: Coulterville Community Fire Protection District (Oakdale) 154.1450 MHz, narrow FM, CSQ; Washington County Fire 151.1525 MHz, narrow FM, CSQ.

What frequency does EMS or the ambulance service use in Bolo?

We do not have a EMS dispatch channel listed specifically for Bolo. The county-level EMS dispatch channels in the same county: Washington County Paramedics (Nashville) 155.0850 MHz, P25, NAC 294.

Do fire departments and EMS use a trunked radio system in Bolo?

Yes. The county-level systems that cover Bolo are Fire and EMS talkgroups are listed for STARCOM21 Statewide Illinois: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Bolo?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Bolo?

For Bolo, start with the DuQuoin site of STARCOM21 Statewide Illinois. Its control channels are 852.4375, 852.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.