Skip to content

Gray Fire and EMS Frequencies

We do not have frequencies listed specifically for Gray in White County, Illinois yet. Countywide channels for White County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Phillipstown (STARCOM21 Statewide Illinois), about 7 miles away.

About Gray Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Gray: White County Fire 151.4000 MHz, narrow FM, 162.2 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

White County channels that also cover Gray

Fire Dispatch

Fire Dispatch frequencies for White County
AgencyDescriptionFrequency (MHz)ToneModeFCC
White County FireWhite County Fire – Dispatch (Norris City)151.4000
In 155.8800
162.2 PLFMNWNDR580
White County FireWhite County Fire – Dispatch (Carmi)159.0000
In 156.0150
88.5 PLFMNWQTU971

Nearest trunked radio sites

Distances are measured from the center of Gray.

Phillipstown · STARCOM21 Statewide Illinois
RFSS 3 · Site 40 (hex 28) · NAC 141 · about 7 mi away
Control 852.325, 852.85, 853.375
Voice 851.4875, 853.95
Carmi · STARCOM21 Statewide Illinois
RFSS 3 · Site 8 (hex 8) · NAC 14A · about 13 mi away
Control 851.875, 852.4, 852.925
Voice 851.35, 853.45
Fairfield · STARCOM21 Statewide Illinois
RFSS 3 · Site 28 (hex 1C) · NAC 149 · about 18 mi away
Control 853.35, 853.925
Voice 852.825, 857.2125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Gray?

We do not have a fire dispatch channel listed specifically for Gray. The county-level fire dispatch channels in the same county: White County Fire 151.4000 MHz, narrow FM, 162.2 PL.

What scanner do I need to listen to fire and EMS in Gray?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Gray?

For Gray, start with the Phillipstown site of STARCOM21 Statewide Illinois. Its control channels are 852.325, 852.85, 853.375 MHz. Program a control channel first; the scanner finds the voice channels from it.