About Montgomery Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Montgomery: Metamora / Spring Bay / Germantown Hills Fire 154.3700 MHz, narrow FM, 110.9 PL. Trunked: STARCOM21 Statewide Illinois, for example Woodford County Fire talkgroup 6387 (hex 18f3).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: STARCOM21 Statewide Illinois: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Montgomery, start with the Congerville site of STARCOM21 Statewide Illinois, about 2 miles away. Its control channels: 851.85, 852.9 MHz.
Data updated .
Woodford County channels that also cover Montgomery
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Metamora / Spring Bay / Germantown Hills Fire | Metamora / Spring Bay / Germantown Hills Fire – Dispatch | 154.3700 | 110.9 PL | FMN | KZZ403 |
| Metamora / Spring Bay / Germantown Hills Fire | Metamora / Spring Bay / Germantown Hills Fire – Remote Receive Link (back to 911) | 453.4500 | 233.6 PL | FMN | KGP621 |
| Metamora / Spring Bay / Germantown Hills Fire | Metamora / Spring Bay / Germantown Hills Fire – Remote Link (From 911/Eureka) | 458.4500 | 233.6 PL | FMN | KGP621 |
| Metamora / Spring Bay / Germantown Hills Fire | Metamora / Spring Bay / Germantown Hills Fire – Remote Receive Link (back to 911) | 460.4500 | 192.8 PL | FMN | KSL488 |
| Metamora / Spring Bay / Germantown Hills Fire | Metamora / Spring Bay / Germantown Hills Fire – Remote Link (From 911/Eureka) | 465.4500 | FMN | KSL488 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Carle Eureka Hospital | Patient Reports | 155.3400 | 141.3 PL | FMN | WPYS415 |
STARCOM21 Statewide Illinois
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Woodford County Fire | Woodford County Fire – Dispatch | 6387 | 18f3 | T |
| Woodford County Fire | Woodford County Fire – Operations | 6388 | 18f4 | T |
| Woodford County Fire | Woodford County Fire – Operations | 6390 | 18f6 | T |
| Woodford County Fire | Woodford County Fire – Operations | 6391 | 18f7 | T |
| Woodford County Fire | Woodford County Fire – Investigation | 6392 | 18f8 | T |
| Woodford County Fire | Eureka-Goodfield Fire Protection District – Goodfield Operations | 37306 | 91ba | T |
Nearest trunked radio sites
Distances are measured from the center of Montgomery.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Montgomery?
We do not have a fire dispatch channel listed specifically for Montgomery. The county-level fire dispatch channels in the same county: Metamora / Spring Bay / Germantown Hills Fire 154.3700 MHz, narrow FM, 110.9 PL.
Do fire departments and EMS use a trunked radio system in Montgomery?
Yes. The county-level systems that cover Montgomery are Fire and EMS talkgroups are listed for STARCOM21 Statewide Illinois: 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Montgomery?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Montgomery?
For Montgomery, start with the Congerville site of STARCOM21 Statewide Illinois. Its control channels are 851.85, 852.9 MHz. Program a control channel first; the scanner finds the voice channels from it.