Skip to content

Gilboa Fire and EMS Frequencies

We do not have frequencies listed specifically for Gilboa in Benton County, Indiana yet. Countywide channels for Benton County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Fowler (Indiana Project Hoosier SAFE-T), about 11 miles away.

About Gilboa Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Gilboa: County Public Safety 154.2050 MHz, narrow FM, 123.0 PL. County-level ems dispatch that covers Gilboa: County Public Safety 154.9950 MHz, narrow FM, 123.0 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Benton County Fire talkgroup 10018 (hex 2722).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Gilboa, start with the Fowler site of Indiana Project Hoosier SAFE-T, about 11 miles away. Its control channels: 852.4375, 853.4875 MHz.

Data updated .

Benton County channels that also cover Gilboa

Fire Dispatch

Fire Dispatch frequencies for Benton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Public SafetyCounty Public Safety – Tone-Outs154.2050123.0 PLFMNWRUX490

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Benton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Public SafetyAmbia Fire – Operations155.8800
In 153.7400
FMNWRUX490

EMS Dispatch

EMS Dispatch frequencies for Benton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Public SafetyCounty Public Safety – Tone-Outs154.9950123.0 PLFMNWRUX490

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Benton County FireFire/EMS/EMA – Dispatch (County)100182722D
Benton County EMSBenton County EMS – Operations (County)100202724D

Nearest trunked radio sites

Distances are measured from the center of Gilboa.

Fowler · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 64 (hex 40) · NAC 6B4 · about 11 mi away
Control 852.4375, 853.4875
Voice 851.4375, 851.9625, 856.4375
Monon · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 18 (hex 12) · NAC 6BF · about 13 mi away
Control 858.9625, 859.9625
Voice 851.475, 853.8625, 855.9625, 856.9625, 857.9625, 858.5125
West Lafayette · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 24 (hex 18) · NAC 6B4 · about 20 mi away
Control 858.7125, 859.7125
Voice 851.3875, 852.3875, 852.8875, 854.3125, 856.4375, 856.7125, 857.7125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Gilboa?

We do not have a fire dispatch channel listed specifically for Gilboa. The county-level fire dispatch channels in the same county: County Public Safety 154.2050 MHz, narrow FM, 123.0 PL.

What frequency does EMS or the ambulance service use in Gilboa?

We do not have a EMS dispatch channel listed specifically for Gilboa. The county-level EMS dispatch channels in the same county: County Public Safety 154.9950 MHz, narrow FM, 123.0 PL.

Do fire departments and EMS use a trunked radio system in Gilboa?

Yes. The county-level systems that cover Gilboa are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Gilboa?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Gilboa?

For Gilboa, start with the Fowler site of Indiana Project Hoosier SAFE-T. Its control channels are 852.4375, 853.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.