About Richland Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Richland: County Public Safety 154.2050 MHz, narrow FM, 123.0 PL. County-level ems dispatch that covers Richland: County Public Safety 154.9950 MHz, narrow FM, 123.0 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Benton County Fire talkgroup 10018 (hex 2722).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Richland, start with the Fowler site of Indiana Project Hoosier SAFE-T, about 5 miles away. Its control channels: 852.4375, 853.4875 MHz.
Data updated .
Benton County channels that also cover Richland
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Public Safety | County Public Safety – Tone-Outs | 154.2050 | 123.0 PL | FMN | WRUX490 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Public Safety | Ambia Fire – Operations | 155.8800 In 153.7400 | FMN | WRUX490 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Public Safety | County Public Safety – Tone-Outs | 154.9950 | 123.0 PL | FMN | WRUX490 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Benton County Fire | Fire/EMS/EMA – Dispatch (County) | 10018 | 2722 | D |
| Benton County EMS | Benton County EMS – Operations (County) | 10020 | 2724 | D |
Nearest trunked radio sites
Distances are measured from the center of Richland.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Richland?
We do not have a fire dispatch channel listed specifically for Richland. The county-level fire dispatch channels in the same county: County Public Safety 154.2050 MHz, narrow FM, 123.0 PL.
What frequency does EMS or the ambulance service use in Richland?
We do not have a EMS dispatch channel listed specifically for Richland. The county-level EMS dispatch channels in the same county: County Public Safety 154.9950 MHz, narrow FM, 123.0 PL.
Do fire departments and EMS use a trunked radio system in Richland?
Yes. The county-level systems that cover Richland are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Richland?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Richland?
For Richland, start with the Fowler site of Indiana Project Hoosier SAFE-T. Its control channels are 852.4375, 853.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.