Skip to content

Licking Fire and EMS Frequencies

We do not have frequencies listed specifically for Licking in Blackford County, Indiana yet. Countywide channels for Blackford County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Hartford City (Indiana Project Hoosier SAFE-T), about 1 miles away.

About Licking Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Licking: Blackford County Fire 151.0400 MHz, narrow FM, 114.8 PL. Trunked: Blackford County Government (IN), for example Blackford County Fire talkgroup 106 (hex 6a).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Blackford County Government (IN): 2 talkgroups; Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Licking, start with the Hartford City site of Indiana Project Hoosier SAFE-T, about 1 miles away. Its control channels: 853.9375, 855.4875 MHz.

Data updated .

Blackford County channels that also cover Licking

Fire Dispatch

Fire Dispatch frequencies for Blackford County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Blackford County FireBlackford County Fire – Dispatch (Multicast on SAFE-T TG 10029 as needed)151.0400
In 159.1800
114.8 PLFMNWRI210

Blackford County Government (IN)

Blackford County Government (IN) talkgroups
AgencyDescriptionTalkgroupHexMode
Blackford County FireBlackford County Fire – Operations (Countywide)1066aT
Blackford County FireBlackford County Fire – Operations (Countywide)1086cT

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Blackford County FireBlackford County Fire – Dispatch (County)10029272dD
Blackford County EMSBlackford County EMS – Dispatch (County)10028272cD

Nearest trunked radio sites

Distances are measured from the center of Licking.

Hartford City · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 53 (hex 35) · NAC 6B3 · about 1 mi away
Control 853.9375, 855.4875
Voice 852.0375, 852.3625, 852.675, 853.3375
Montpelier · Blackford County Government (IN)
Site 2 (hex 2) · about 2 mi away
Voice 153.3275
Security Center · Blackford County Government (IN)
Site 1 (hex 1) · about 6 mi away
Voice 151.325
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Licking?

We do not have a fire dispatch channel listed specifically for Licking. The county-level fire dispatch channels in the same county: Blackford County Fire 151.0400 MHz, narrow FM, 114.8 PL.

Do fire departments and EMS use a trunked radio system in Licking?

Yes. The county-level systems that cover Licking are Fire and EMS talkgroups are listed for Blackford County Government (IN): 2 talkgroups; Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Licking?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Licking?

For Licking, start with the Hartford City site of Indiana Project Hoosier SAFE-T. Its control channels are 853.9375, 855.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.