Skip to content

Hamblen Fire and EMS Frequencies

We do not have frequencies listed specifically for Hamblen in Brown County, Indiana yet. Countywide channels for Brown County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Brown County (Indiana Project Hoosier SAFE-T), about 5 miles away.

About Hamblen Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Hamblen: EMA/Fire/EMS 154.0625 MHz, narrow FM, 110.9 PL. County-level ems dispatch that covers Hamblen: EMA/Fire/EMS 154.8750 MHz, narrow FM, 110.9 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Brown County Fire talkgroup 21040 (hex 5230).

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Hamblen, start with the Brown County site of Indiana Project Hoosier SAFE-T, about 5 miles away. Its control channels: 858.0125, 859.5, 859.6625 MHz.

Data updated .

Brown County channels that also cover Hamblen

Fire Dispatch

Fire Dispatch frequencies for Brown County
AgencyDescriptionFrequency (MHz)ToneModeFCC
EMA/Fire/EMSEMA/Fire/EMS – Dispatch154.0625
In 158.9625
110.9 PLFMNWQQS215

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Brown County
AgencyDescriptionFrequency (MHz)ToneModeFCC
EMA/Fire/EMSEMA/Fire/EMS – Tactical Channel154.0400110.9 PLFMNWNIN327
EMA/Fire/EMSEMA/Fire/EMS – Tactical Channel154.0400
In 158.8800
103.5 PLFMNWNIN327

Fire Talk-around

Fire Talk-around frequencies for Brown County
AgencyDescriptionFrequency (MHz)ToneModeFCC
EMA/Fire/EMSEMA/Fire/EMS – Fire Ground156.1875132 DPLFMN—
EMA/Fire/EMSEMA/Fire/EMS – Fire Ground159.1725115 DPLFMN—

EMS Dispatch

EMS Dispatch frequencies for Brown County
AgencyDescriptionFrequency (MHz)ToneModeFCC
EMA/Fire/EMSEMA/Fire/EMS – Dispatch154.8750
In 155.9700
110.9 PLFMNKSD629
EMA/Fire/EMSEMA/Fire/EMS – Remote Link453.6250
In 458.6250
FMNKSD629

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Brown County FireBrown County Fire – Dispatch (County)210405230D
Brown County FireBrown County Fire – Fire Ground (County)210415231D
Brown County FireBrown County Fire – Fire Ground (County)210425232D
Brown County FireBrown County Fire – Fire Ground (County)210435233D
Brown County EMSBrown County EMS – Dispatch (County)21052523cD
Brown County HospitalHospital Operations (County)210445234D

Nearest trunked radio sites

Distances are measured from the center of Hamblen.

Brown County · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 84 (hex 54) · NAC 6B4 · about 5 mi away
Control 858.0125, 859.5, 859.6625
Voice 854.1375, 854.6375, 856.0125, 857.0125
Nashville · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 19 (hex 13) · NAC 6BB · about 7 mi away
Control 852.6, 853.4
Voice 851.75, 852.375
Edinburgh · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 79 (hex 4F) · NAC 6B7 · about 9 mi away
Control 854.2125, 854.4125
Voice 852.2625, 852.65, 852.9875, 853.25, 853.625, 853.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Hamblen?

We do not have a fire dispatch channel listed specifically for Hamblen. The county-level fire dispatch channels in the same county: EMA/Fire/EMS 154.0625 MHz, narrow FM, 110.9 PL.

What frequency does EMS or the ambulance service use in Hamblen?

We do not have a EMS dispatch channel listed specifically for Hamblen. The county-level EMS dispatch channels in the same county: EMA/Fire/EMS 154.8750 MHz, narrow FM, 110.9 PL.

Do fire departments and EMS use a trunked radio system in Hamblen?

Yes. The county-level systems that cover Hamblen are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Hamblen?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Hamblen?

For Hamblen, start with the Brown County site of Indiana Project Hoosier SAFE-T. Its control channels are 858.0125, 859.5, 859.6625 MHz. Program a control channel first; the scanner finds the voice channels from it.