About Adams Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Adams: Emergency Management/Fire/EMS 154.1300 MHz, narrow FM, 82.5 PL. County-level ems dispatch that covers Adams: Emergency Management/Fire/EMS 155.8050 MHz, narrow FM, 82.5 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Carroll County Fire talkgroup 10056 (hex 2748).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Adams, start with the Monticello site of Indiana Project Hoosier SAFE-T, about 6 miles away. Its control channels: 857.9375, 857.9875 MHz.
Data updated .
Carroll County channels that also cover Adams
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Emergency Management/Fire/EMS | Emergency Management/Fire/EMS – Dispatch – Countywide (multicast from SAFE-T) | 154.1300 | 82.5 PL | FMN | WPAJ313 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Emergency Management/Fire/EMS | Emergency Management/Fire/EMS – Tactical Channel | 153.8300 | FMN | KFG517 | |
| Emergency Management/Fire/EMS | Emergency Management/Fire/EMS – Tactical Channel | 154.0700 | FMN | KNIE586 | |
| Emergency Management/Fire/EMS | Emergency Management | 158.7450 | FMN | WPAJ704 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Emergency Management/Fire/EMS | Emergency Management/Fire/EMS – Dispatch – Countywide | 155.8050 | 82.5 PL | FMN | WPLD247 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Carroll County Fire | Carroll County Fire – Dispatch – Countywide | 10056 | 2748 | D |
| Carroll County Fire | Carroll County Fire – Fire Ground (County) | 10051 | 2743 | D |
| Carroll County Fire | Carroll County Fire – Fire Ground (County) | 10052 | 2744 | D |
| Carroll County EMS | Carroll County EMS – Dispatch – Countywide | 10055 | 2747 | D |
Nearest trunked radio sites
Distances are measured from the center of Adams.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Adams?
We do not have a fire dispatch channel listed specifically for Adams. The county-level fire dispatch channels in the same county: Emergency Management/Fire/EMS 154.1300 MHz, narrow FM, 82.5 PL.
What frequency does EMS or the ambulance service use in Adams?
We do not have a EMS dispatch channel listed specifically for Adams. The county-level EMS dispatch channels in the same county: Emergency Management/Fire/EMS 155.8050 MHz, narrow FM, 82.5 PL.
Do fire departments and EMS use a trunked radio system in Adams?
Yes. The county-level systems that cover Adams are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Adams?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Adams?
For Adams, start with the Monticello site of Indiana Project Hoosier SAFE-T. Its control channels are 857.9375, 857.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.