Skip to content

Clay Fire and EMS Frequencies

We do not have frequencies listed specifically for Clay in Carroll County, Indiana yet. Countywide channels for Carroll County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Delphi (Indiana Project Hoosier SAFE-T), about 7 miles away.

About Clay Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Clay: Emergency Management/Fire/EMS 154.1300 MHz, narrow FM, 82.5 PL. County-level ems dispatch that covers Clay: Emergency Management/Fire/EMS 155.8050 MHz, narrow FM, 82.5 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Carroll County Fire talkgroup 10056 (hex 2748).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Clay, start with the Delphi site of Indiana Project Hoosier SAFE-T, about 7 miles away. Its control channels: 856.1375, 858.0875 MHz.

Data updated .

Carroll County channels that also cover Clay

Fire Dispatch

Fire Dispatch frequencies for Carroll County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Emergency Management/Fire/EMSEmergency Management/Fire/EMS – Dispatch – Countywide (multicast from SAFE-T)154.130082.5 PLFMNWPAJ313

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Carroll County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Emergency Management/Fire/EMSEmergency Management/Fire/EMS – Tactical Channel153.8300FMNKFG517
Emergency Management/Fire/EMSEmergency Management/Fire/EMS – Tactical Channel154.0700FMNKNIE586
Emergency Management/Fire/EMSEmergency Management158.7450FMNWPAJ704

EMS Dispatch

EMS Dispatch frequencies for Carroll County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Emergency Management/Fire/EMSEmergency Management/Fire/EMS – Dispatch – Countywide155.805082.5 PLFMNWPLD247

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Carroll County FireCarroll County Fire – Dispatch – Countywide100562748D
Carroll County FireCarroll County Fire – Fire Ground (County)100512743D
Carroll County FireCarroll County Fire – Fire Ground (County)100522744D
Carroll County EMSCarroll County EMS – Dispatch – Countywide100552747D

Nearest trunked radio sites

Distances are measured from the center of Clay.

Delphi · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 96 (hex 60) · NAC 6B6 · about 7 mi away
Control 856.1375, 858.0875
Voice 852.4625, 852.9625, 853.475
Flora · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 66 (hex 42) · NAC 6B6 · about 9 mi away
Control 853.6125, 854.9625
Voice 851.825, 852.9875, 857.0625
Geetingsville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 25 (hex 19) · NAC 6B5 · about 10 mi away
Control 852.95, 853.95
Voice 851.45, 851.95, 852.45, 856.7125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Clay?

We do not have a fire dispatch channel listed specifically for Clay. The county-level fire dispatch channels in the same county: Emergency Management/Fire/EMS 154.1300 MHz, narrow FM, 82.5 PL.

What frequency does EMS or the ambulance service use in Clay?

We do not have a EMS dispatch channel listed specifically for Clay. The county-level EMS dispatch channels in the same county: Emergency Management/Fire/EMS 155.8050 MHz, narrow FM, 82.5 PL.

Do fire departments and EMS use a trunked radio system in Clay?

Yes. The county-level systems that cover Clay are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Clay?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Clay?

For Clay, start with the Delphi site of Indiana Project Hoosier SAFE-T. Its control channels are 856.1375, 858.0875 MHz. Program a control channel first; the scanner finds the voice channels from it.