Skip to content

Johnson Fire and EMS Frequencies

We do not have frequencies listed specifically for Johnson in Clinton County, Indiana yet. Countywide channels for Clinton County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Frankfort (Indiana Project Hoosier SAFE-T), about 11 miles away.

About Johnson Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Johnson: Clinton County Fire 153.2900 MHz, narrow FM, 365 DPL; Emergency Management/Fire/EMS 154.2200 MHz, narrow FM, 192.8 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Clinton County Fire talkgroup 10100 (hex 2774).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Johnson, start with the Frankfort site of Indiana Project Hoosier SAFE-T, about 11 miles away. Its control channels: 854.2125, 854.4125 MHz.

Data updated .

Clinton County channels that also cover Johnson

Fire Dispatch

Fire Dispatch frequencies for Clinton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clinton County FireClinton County Fire – Dispatch (Rebroadcast of SAFE-T)153.2900365 DPLFMNWPPB519
Emergency Management/Fire/EMSEmergency Management/Fire/EMS – Dispatch – Countywide (Multicast of SAFE-T)154.2200192.8 PLFMNKBR865
Emergency Management/Fire/EMS UnconfirmedEmergency Management/Fire/EMS – Remote Link453.0375
In 458.0375
FMNWQMR282

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Clinton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Emergency Management/Fire/EMSRossville Fire – Secondary154.0400FMNKNNP729
Emergency Management/Fire/EMS[BACKUP) Emergency Management155.8350
In 155.1450
110.9 PLFMNKZZ773

EMS Tactical

EMS Tactical frequencies for Clinton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Emergency Management/Fire/EMSEmergency Management/Fire/EMS – Operations – Countywide155.3850CSQFMNKZJ503

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Clinton County FireClinton County Fire – Dispatch (County)101002774D
Clinton County FireClinton County Fire – Operations (County)101012775D
Clinton County FireClinton County Fire – Operations (County)101022776D
Clinton County FireClinton County Fire – Operations (County)101032777D
Clinton County FireClinton County Fire – Operations (County)101042778D
Clinton County FireClinton County Fire – Talk-Around (County)101052779D
Clinton County EMSClinton County EMS – Operations (County)100992773D

Nearest trunked radio sites

Distances are measured from the center of Johnson.

Frankfort · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 69 (hex 45) · NAC 6B9 · about 11 mi away
Control 854.2125, 854.4125
Voice 851.6625, 852.05, 853.25
Geetingsville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 25 (hex 19) · NAC 6B5 · about 12 mi away
Control 852.95, 853.95
Voice 851.45, 851.95, 852.45, 856.7125
Tipton · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 56 (hex 38) · NAC 6B6 · about 14 mi away
Control 852.6625, 852.9375
Voice 851.075, 851.4125, 851.6375, 852.475
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Johnson?

We do not have a fire dispatch channel listed specifically for Johnson. The county-level fire dispatch channels in the same county: Clinton County Fire 153.2900 MHz, narrow FM, 365 DPL; Emergency Management/Fire/EMS 154.2200 MHz, narrow FM, 192.8 PL.

Do fire departments and EMS use a trunked radio system in Johnson?

Yes. The county-level systems that cover Johnson are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Johnson?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Johnson?

For Johnson, start with the Frankfort site of Indiana Project Hoosier SAFE-T. Its control channels are 854.2125, 854.4125 MHz. Program a control channel first; the scanner finds the voice channels from it.