Skip to content

Marion Fire and EMS Frequencies

We do not have frequencies listed specifically for Marion in Decatur County, Indiana yet. Countywide channels for Decatur County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Letts (Indiana Project Hoosier SAFE-T), about 6 miles away.

About Marion Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Marion: Decatur County Public Safety 154.3850 MHz, narrow FM, 85.4 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Decatur County Fire talkgroup 21137 (hex 5291).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Marion, start with the Letts site of Indiana Project Hoosier SAFE-T, about 6 miles away. Its control channels: 771.60625, 773.40625 MHz.

Data updated .

Decatur County channels that also cover Marion

Fire Dispatch

Fire Dispatch frequencies for Decatur County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Decatur County Public SafetyFire/EMS Dispatch154.3850
In 153.9500
85.4 PLFMNWNNI403

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Decatur County FireDecatur County Fire – Dispatch211375291D
Decatur County FireDecatur County Fire – Fire Ground211385292D
Decatur County FireDecatur County Fire – Fire Ground211395293D
Decatur County FireDecatur County Fire – Fire Ground211405294D
Decatur County FireDecatur County Fire – Fire Ground211415295D
Decatur County EMSDecatur County EMS – Tactical Channel21147529bD

Nearest trunked radio sites

Distances are measured from the center of Marion.

Letts · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 79 (hex 4F) · NAC 6B0 · about 6 mi away
Control 771.60625, 773.40625
Voice 769.85625, 771.05625, 771.33125
Greensburg · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 46 (hex 2E) · NAC 6B4 · about 6 mi away
Control 852.9125, 853.4125
Voice 851.4125, 851.9125, 853.1875
Batesville · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 44 (hex 2C) · NAC 6B4 · about 13 mi away
Control 852.125, 853.2125, 853.8125
Voice 851.7375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Marion?

We do not have a fire dispatch channel listed specifically for Marion. The county-level fire dispatch channels in the same county: Decatur County Public Safety 154.3850 MHz, narrow FM, 85.4 PL.

Do fire departments and EMS use a trunked radio system in Marion?

Yes. The county-level systems that cover Marion are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Marion?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Marion?

For Marion, start with the Letts site of Indiana Project Hoosier SAFE-T. Its control channels are 771.60625, 773.40625 MHz. Program a control channel first; the scanner finds the voice channels from it.