Skip to content

Clinton Fire and EMS Frequencies

We do not have frequencies listed specifically for Clinton in Elkhart County, Indiana yet. Countywide channels for Elkhart County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Elkhart Co Simulcast (Indiana Project Hoosier SAFE-T), about 8 miles away.

About Clinton Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Clinton: Elkhart County Fire/EMS 153.7700 MHz, narrow FM, 114.8 PL; Jefferson Township Fire 154.2800 MHz, narrow FM, no tone; Osolo Township Fire 154.3850 MHz, narrow FM, no tone. Trunked: Indiana Project Hoosier SAFE-T, for example Elkhart County Fire talkgroup 10209 (hex 27e1).

  • 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Clinton, start with the Elkhart Co Simulcast site of Indiana Project Hoosier SAFE-T, about 8 miles away. Its control channels: 772.55625, 772.93125 MHz.

Data updated .

Elkhart County channels that also cover Clinton

Fire Dispatch

Fire Dispatch frequencies for Elkhart County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Elkhart County Fire/EMSElkhart County Fire/EMS – Dispatch153.7700
In 154.3250
114.8 PLFMNKSE904
Jefferson Township FireDispatch? .154.2800FMNWQAJ416
Osolo Township FireOsolo Township Fire – Repeater154.3850FMNKSG502

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Elkhart County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Elkhart County Fire/EMSElkhart County Fire/EMS – Fire Ground154.0700FMNKSE904
Elkhart County Fire/EMSElkhart County Fire/EMS – Fire Ground154.1450FMNWNAN786
Elkhart County Fire/EMSElkhart County Fire/EMS – Fire Ground154.4450FMNKSE904
Jefferson Township FireTactical? .153.7700FMNWQAJ416
Osolo Township FireOsolo Township Fire – Fire Ground154.0100FMNKSG502
Osolo Township FireOsolo Township Fire – Fire Ground (Channel 2)155.2650FMNWPLX426

Fire Talk-around

Fire Talk-around frequencies for Elkhart County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Osolo Township FireOsolo Township Fire – Talkaround159.0600343 DPLFMNKSG502

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Elkhart County FireElkhart County Fire – Hazmat (Countywide)1020927e1D
Elkhart County FireElkhart County Fire – Tactical Channel (Countywide)1021127e3D
Elkhart County FireElkhart County Fire – Tactical Channel (Countywide)1021227e4D
Elkhart County FireElkhart County Fire – Tactical Channel (Countywide)1021327e5D
Elkhart County FireElkhart County Fire – Tactical Channel (Countywide)1021427e6D
Elkhart County FireElkhart County Fire – Tactical Channel (Countywide)1022627f2D
Elkhart County HospitalIHERN Elkhart General Hospital ER (Patient Reports)125773121D
Elkhart County HospitalIHERN Goshen General Hospital ER (Patient Reports)1273531bfD

Nearest trunked radio sites

Distances are measured from the center of Clinton.

Elkhart Co Simulcast · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 9 (hex 9) · NAC 6B9 · about 8 mi away
Control 772.55625, 772.93125
Voice 769.30625, 769.55625, 770.08125, 770.53125, 770.78125, 771.15625, 771.40625, 771.68125, 771.95625, 772.30625
Ligonier · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 43 (hex 2B) · NAC 6B3 · about 10 mi away
Control 853.4875, 855.2375
Voice 851.05, 851.4875, 852.2, 852.5375
Lagrange · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 42 (hex 2A) · NAC 6BB · about 17 mi away
Control 853.225, 853.425
Voice 851.2375, 851.7125, 851.8625, 852.8625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Clinton?

We do not have a fire dispatch channel listed specifically for Clinton. The county-level fire dispatch channels in the same county: Elkhart County Fire/EMS 153.7700 MHz, narrow FM, 114.8 PL; Jefferson Township Fire 154.2800 MHz, narrow FM, no tone; Osolo Township Fire 154.3850 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Clinton?

Yes. The county-level systems that cover Clinton are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Clinton?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Clinton?

For Clinton, start with the Elkhart Co Simulcast site of Indiana Project Hoosier SAFE-T. Its control channels are 772.55625, 772.93125 MHz. Program a control channel first; the scanner finds the voice channels from it.