About Newcastle Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Newcastle: Fulton County Fire/EMS 154.2350 MHz, narrow FM, 103.5 PL. County-level ems dispatch that covers Newcastle: Fulton County Fire/EMS 155.2050 MHz, narrow FM, 192.8 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Fulton County Fire talkgroup 10269 (hex 281d).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Newcastle, start with the Rochester site of Indiana Project Hoosier SAFE-T, about 9 miles away. Its control channels: 853.4, 855.4875 MHz.
Data updated .
Fulton County channels that also cover Newcastle
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fulton County Fire/EMS | Fulton County Fire/EMS – Dispatch (Countywide) | 154.2350 In 150.7900 | 103.5 PL | FMN | KFT462 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fulton County Fire/EMS | Akron Fire | 154.3400 | FM | — | |
| Fulton County Fire/EMS | Kewanna Fire | 155.7600 | FM | KNJB880 | |
| Kewana Fire | Local Govt / Fire Tactical | 155.7600 | FMN | KNJB880 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fulton County Fire/EMS | Parkview Hospital Samaritan | 155.2050 | 192.8 PL | FMN | KWS502 |
| Fulton County Fire/EMS | Lutheran-Fulton Co. EMS Dispatch | 155.9550 In 151.0400 | 103.5 PL | FMN | KDZ745 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Fulton County Fire | Fulton County Fire – Dispatch | 10269 | 281d | D |
| Fulton County Fire | Fulton County Fire – Fire Ground | 10270 | 281e | D |
| Fulton County EMS | Fulton County EMS – Dispatch | 10268 | 281c | D |
| Fulton County EMS | Fulton County EMS – Operations | 10267 | 281b | D |
Nearest trunked radio sites
Distances are measured from the center of Newcastle.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Newcastle?
We do not have a fire dispatch channel listed specifically for Newcastle. The county-level fire dispatch channels in the same county: Fulton County Fire/EMS 154.2350 MHz, narrow FM, 103.5 PL.
What frequency does EMS or the ambulance service use in Newcastle?
We do not have a EMS dispatch channel listed specifically for Newcastle. The county-level EMS dispatch channels in the same county: Fulton County Fire/EMS 155.2050 MHz, narrow FM, 192.8 PL.
Do fire departments and EMS use a trunked radio system in Newcastle?
Yes. The county-level systems that cover Newcastle are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Newcastle?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Newcastle?
For Newcastle, start with the Rochester site of Indiana Project Hoosier SAFE-T. Its control channels are 853.4, 855.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.