Skip to content

Wabash Fire and EMS Frequencies

We do not have frequencies listed specifically for Wabash in Gibson County, Indiana yet. Countywide channels for Gibson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Poseyville (Posey County Public Safety), about 8 miles away.

About Wabash Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Wabash: Gibson County Fire 154.9800 MHz, narrow FM, CSQ. Trunked: Indiana Project Hoosier SAFE-T, for example Gibson County Fire talkgroup 21237 (hex 52f5).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Wabash, start with the Poseyville site of Posey County Public Safety, about 8 miles away. Its control channels: 154.7325, 155.8725 MHz.

Data updated .

Gibson County channels that also cover Wabash

Fire Dispatch

Fire Dispatch frequencies for Gibson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gibson County FireGibson County Fire – Dispatch154.9800CSQFMNWPEY885

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Gibson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gibson County FireGibson County Fire – Mutual Aid/Operations154.265091.5 PLFMNWNUG308

EMS Tactical

EMS Tactical frequencies for Gibson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gibson County EMSGibson County EMS – Operations151.4075
In 158.8575
91.5 PLFMNWQWQ245

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Gibson County FireGibson County Fire – Dispatch2123752f5D
Gibson County FireGibson County Fire – Fire Ground2123852f6D
Gibson County FireGibson County Fire – Fire Ground2123952f7D
Gibson County FireGibson County Fire – Fire Ground2124052f8D
Gibson County FireGibson County Fire – Fire Ground2124152f9D
Gibson County FireGibson County Fire – Fire Ground2124252faD
Gibson County EMSGibson County EMS – Dispatch2123552f3D
Gibson County EMSGibson County EMS – Operations2123652f4D

Nearest trunked radio sites

Distances are measured from the center of Wabash.

Poseyville · Posey County Public Safety
Site 4 (hex 4) · about 8 mi away
Control 154.7325, 155.8725
Voice 154.7925
New Harmony · Posey County Public Safety
Site 3 (hex 3) · about 10 mi away
Control 151.1825, 154.055
Voice 154.8675
New Harmony · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 75 (hex 4B) · NAC 6B8 · about 11 mi away
Control 853.9875, 858.4875
Voice 851.9875, 853.425
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Wabash?

We do not have a fire dispatch channel listed specifically for Wabash. The county-level fire dispatch channels in the same county: Gibson County Fire 154.9800 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Wabash?

Yes. The county-level systems that cover Wabash are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Wabash?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Wabash?

For Wabash, start with the Poseyville site of Posey County Public Safety. Its control channels are 154.7325, 155.8725 MHz. Program a control channel first; the scanner finds the voice channels from it.