Skip to content

White River Fire and EMS Frequencies

We do not have frequencies listed specifically for White River in Gibson County, Indiana yet. Countywide channels for Gibson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Princeton (Indiana Project Hoosier SAFE-T), about 12 miles away.

About White River Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers White River: Gibson County Fire 154.9800 MHz, narrow FM, CSQ. Trunked: Indiana Project Hoosier SAFE-T, for example Gibson County Fire talkgroup 21237 (hex 52f5).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For White River, start with the Princeton site of Indiana Project Hoosier SAFE-T, about 12 miles away. Its control channels: 853.85, 858.9875 MHz.

Data updated .

Gibson County channels that also cover White River

Fire Dispatch

Fire Dispatch frequencies for Gibson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gibson County FireGibson County Fire – Dispatch154.9800CSQFMNWPEY885

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Gibson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gibson County FireGibson County Fire – Mutual Aid/Operations154.265091.5 PLFMNWNUG308

EMS Tactical

EMS Tactical frequencies for Gibson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gibson County EMSGibson County EMS – Operations151.4075
In 158.8575
91.5 PLFMNWQWQ245

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Gibson County FireGibson County Fire – Dispatch2123752f5D
Gibson County FireGibson County Fire – Fire Ground2123852f6D
Gibson County FireGibson County Fire – Fire Ground2123952f7D
Gibson County FireGibson County Fire – Fire Ground2124052f8D
Gibson County FireGibson County Fire – Fire Ground2124152f9D
Gibson County FireGibson County Fire – Fire Ground2124252faD
Gibson County EMSGibson County EMS – Dispatch2123552f3D
Gibson County EMSGibson County EMS – Operations2123652f4D

Nearest trunked radio sites

Distances are measured from the center of White River.

Princeton · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 69 (hex 45) · NAC 6B6 · about 12 mi away
Control 853.85, 858.9875
Voice 851.0375, 853.6, 858.7125
Vincennes · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 67 (hex 43) · NAC 6B6 · about 17 mi away
Control 859.2625, 859.7625
Voice 851.9875, 852.45, 852.65, 853.3625, 857.6625, 858.2625, 858.7625
Petersburg · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 22 (hex 16) · NAC 6B2 · about 19 mi away
Control 852.975, 853.475
Voice 851.475, 851.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in White River?

We do not have a fire dispatch channel listed specifically for White River. The county-level fire dispatch channels in the same county: Gibson County Fire 154.9800 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in White River?

Yes. The county-level systems that cover White River are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in White River?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in White River?

For White River, start with the Princeton site of Indiana Project Hoosier SAFE-T. Its control channels are 853.85, 858.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.