Skip to content

Brown Fire and EMS Frequencies

We do not have frequencies listed specifically for Brown in Hancock County, Indiana yet. Countywide channels for Hancock County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Wilkinson (Indiana Project Hoosier SAFE-T), about 2 miles away.

About Brown Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Brown: Hancock County Fire 155.8200 MHz, narrow FM, 203.5 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Hancock County Fire talkgroup 10332 (hex 285c).

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Brown, start with the Wilkinson site of Indiana Project Hoosier SAFE-T, about 2 miles away. Its control channels: 854.2375, 854.3875 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Hancock County channels that also cover Brown

Fire Dispatch

Fire Dispatch frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hancock County FireHancock County Fire – Dispatch155.8200203.5 PLFMNWNSX425

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hancock County FireHancock County Fire – Fire Ground154.1450146.2 PLFMNWNKX220
Hancock County FireHancock County Fire – Fire Ground154.4000FMNWPGA634
Hancock County FireHancock County Fire – Fire Ground155.1000FMNWPGA634
Hancock County FireHancock County Fire – Fire Ground156.0150FMNWPGA634
Hancock County FireHancock County Fire – Fire Ground156.2250FMNWPGA634
Hancock County FireHancock County Fire – Fire Ground159.1350FMNWPGA634
Sugar Creek Twp. FireSugar Creek Twp. Fire (Channel 2)154.4000FMNKNJG725

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Hancock County FireHancock County Fire – Control (County)10332285cD
Hancock County FireHancock County Fire – Dispatch (County) (Multicast on 155.82)10382288eD
Hancock County FireHancock County Fire – Fire Ground (County)103262856D
Hancock County FireHancock County Fire – Fire Ground (County)103272857D
Hancock County FireHancock County Fire – Fire Ground (County)103282858D
Hancock County FireHancock County Fire – Fire Ground (County)103292859D
Hancock County FireHancock County Fire – Fire Ground (County)10330285aD
1 encrypted talkgroup (cannot be monitored)
Indiana Project Hoosier SAFE-T encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Hancock County FireHancock County Fire – Marshal (County)10331285bD Encrypted

Nearest trunked radio sites

Distances are measured from the center of Brown.

Wilkinson · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 73 (hex 49) · NAC 6B3 · about 2 mi away
Control 854.2375, 854.3875
Voice 851.375, 852.5875, 853.05, 854.0125, 854.4375
Pendleton · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 33 (hex 21) · NAC 6BF · about 9 mi away
Control 858.4875, 858.6625, 859.4875
Voice 851.4, 852.4, 853.4, 853.875, 854.0875, 856.4875, 857.4875, 859.7125
Knightstown · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 94 (hex 5E) · NAC 6B4 · about 9 mi away
Control 774.43125, 774.68125
Voice 769.81875, 770.26875, 770.81875, 771.54375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Brown?

We do not have a fire dispatch channel listed specifically for Brown. The county-level fire dispatch channels in the same county: Hancock County Fire 155.8200 MHz, narrow FM, 203.5 PL.

Do fire departments and EMS use a trunked radio system in Brown?

Yes. The county-level systems that cover Brown are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Brown?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Brown?

For Brown, start with the Wilkinson site of Indiana Project Hoosier SAFE-T. Its control channels are 854.2375, 854.3875 MHz. Program a control channel first; the scanner finds the voice channels from it.