About Vernon Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Vernon: Hancock County Fire 155.8200 MHz, narrow FM, 203.5 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Hancock County Fire talkgroup 10332 (hex 285c).
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Vernon, start with the Pendleton site of Indiana Project Hoosier SAFE-T, about 9 miles away. Its control channels: 858.4875, 858.6625, 859.4875 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Hancock County channels that also cover Vernon
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hancock County Fire | Hancock County Fire – Dispatch | 155.8200 | 203.5 PL | FMN | WNSX425 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hancock County Fire | Hancock County Fire – Fire Ground | 154.1450 | 146.2 PL | FMN | WNKX220 |
| Hancock County Fire | Hancock County Fire – Fire Ground | 154.4000 | FMN | WPGA634 | |
| Hancock County Fire | Hancock County Fire – Fire Ground | 155.1000 | FMN | WPGA634 | |
| Hancock County Fire | Hancock County Fire – Fire Ground | 156.0150 | FMN | WPGA634 | |
| Hancock County Fire | Hancock County Fire – Fire Ground | 156.2250 | FMN | WPGA634 | |
| Hancock County Fire | Hancock County Fire – Fire Ground | 159.1350 | FMN | WPGA634 | |
| Sugar Creek Twp. Fire | Sugar Creek Twp. Fire (Channel 2) | 154.4000 | FMN | KNJG725 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Hancock County Fire | Hancock County Fire – Control (County) | 10332 | 285c | D |
| Hancock County Fire | Hancock County Fire – Dispatch (County) (Multicast on 155.82) | 10382 | 288e | D |
| Hancock County Fire | Hancock County Fire – Fire Ground (County) | 10326 | 2856 | D |
| Hancock County Fire | Hancock County Fire – Fire Ground (County) | 10327 | 2857 | D |
| Hancock County Fire | Hancock County Fire – Fire Ground (County) | 10328 | 2858 | D |
| Hancock County Fire | Hancock County Fire – Fire Ground (County) | 10329 | 2859 | D |
| Hancock County Fire | Hancock County Fire – Fire Ground (County) | 10330 | 285a | D |
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Hancock County Fire | Hancock County Fire – Marshal (County) | 10331 | 285b | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Vernon.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Vernon?
We do not have a fire dispatch channel listed specifically for Vernon. The county-level fire dispatch channels in the same county: Hancock County Fire 155.8200 MHz, narrow FM, 203.5 PL.
Do fire departments and EMS use a trunked radio system in Vernon?
Yes. The county-level systems that cover Vernon are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Vernon?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Vernon?
For Vernon, start with the Pendleton site of Indiana Project Hoosier SAFE-T. Its control channels are 858.4875, 858.6625, 859.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.