About Liberty Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Liberty: Fire/EMS/Emergency Management 153.8900 MHz, narrow FM, 162 DPL. Trunked: Indiana Project Hoosier SAFE-T, for example Hendricks County Fire talkgroup 10359 (hex 2877).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 16 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Liberty, start with the INDOC Plainfield site of Indiana Project Hoosier SAFE-T, about 5 miles away. Its control channels: 771.53125, 771.78125 MHz.
- 2 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Hendricks County channels that also cover Liberty
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire/EMS/Emergency Management | Fire/EMS/Emergency Management – Paging – South | 153.8900 | 162 DPL | FMN | KSP309 |
| Fire/EMS/Emergency Management | Fire/EMS/Emergency Management – Paging – North | 154.1300 | 162 DPL | FMN | KSP309 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire/EMS/Emergency Management | Emergency Management | 155.9625 In 159.2925 | 023 DPL | FMN | KSP309 |
| Fire/EMS/Emergency Management Backup | Fire/EMS/Emergency Management – Operations | 158.8350 | FMN | KSP309 | |
| Fire/EMS/Emergency Management Backup | Fire/EMS/Emergency Management – Operations | 159.2925 | FMN | KSP309 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Hendricks County Fire | Hendricks County Fire – Dispatch (County) | 10359 | 2877 | D |
| Hendricks County Fire | Interop (County) | 10350 | 286e | D |
| Hendricks County Fire | Hendricks County Fire – Common (County) | 10360 | 2878 | D |
| Hendricks County Fire | Hendricks County Fire – Operations (County) | 10361 | 2879 | D |
| Hendricks County Fire | Hendricks County Fire – Operations (County) | 10362 | 287a | D |
| Hendricks County Fire | Hendricks County Fire – Operations (County) | 10363 | 287b | D |
| Hendricks County Fire | Hendricks County Fire – Operations (County) | 10364 | 287c | D |
| Hendricks County Fire | Hendricks County Fire – Operations (County) | 10365 | 287d | D |
| Hendricks County Fire | Hendricks County Fire – Operations (County) | 10366 | 287e | D |
| Hendricks County Fire | Hendricks County Fire – Operations (County) | 10367 | 287f | D |
| Hendricks County Fire | Hendricks County Fire – Operations (County) | 10368 | 2880 | D |
| Hendricks County Fire | Hendricks County Fire – Training (County) | 10369 | 2881 | D |
| Hendricks County Fire | Hendricks County Fire – Administration (County) | 10354 | 2872 | D |
| Hendricks County Hospital | EMS-to-Hendricks Regional Brownsburg ER | 10373 | 2885 | D |
2 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Hendricks County Hospital | EMS-to-Hendricks Regional ER | 10370 | 2882 | D Encrypted |
| Hendricks County Hospital | EMS-to-IU Health West ER | 10372 | 2884 | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Liberty.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Liberty?
We do not have a fire dispatch channel listed specifically for Liberty. The county-level fire dispatch channels in the same county: Fire/EMS/Emergency Management 153.8900 MHz, narrow FM, 162 DPL.
Do fire departments and EMS use a trunked radio system in Liberty?
Yes. The county-level systems that cover Liberty are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 16 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Liberty?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Liberty?
For Liberty, start with the INDOC Plainfield site of Indiana Project Hoosier SAFE-T. Its control channels are 771.53125, 771.78125 MHz. Program a control channel first; the scanner finds the voice channels from it.