Skip to content

Milroy Fire and EMS Frequencies

We do not have frequencies listed specifically for Milroy in Jasper County, Indiana yet. Countywide channels for Jasper County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Monon (Indiana Project Hoosier SAFE-T), about 1 miles away.

About Milroy Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Milroy: Jasper County Fire/EMS 154.1450 MHz, narrow FM, 162.2 PL. County-level ems dispatch that covers Milroy: Jasper County Fire/EMS 154.3850 MHz, narrow FM, 162 DPL (expired). Trunked: Indiana Project Hoosier SAFE-T, for example Jasper County Fire talkgroup 10794 (hex 2a2a).

  • 12 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Milroy, start with the Monon site of Indiana Project Hoosier SAFE-T, about 1 miles away. Its control channels: 858.9625, 859.9625 MHz.
  • 2 entries are marked expired, so they may no longer be in use.

Data updated .

Jasper County channels that also cover Milroy

Fire Dispatch

Fire Dispatch frequencies for Jasper County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jasper County Fire/EMSJasper County Fire/EMS – Dispatch154.1450162.2 PLFMNWQKE933
Jasper County Fire/EMSJasper County Fire/EMS – UHF Link – Demotte453.3875FMNWQKE933
Jasper County Fire/EMSJasper County Fire/EMS – UHF Link – Demotte453.5875FMNWQKE933
Jasper County Fire/EMSJasper County Fire/EMS – UHF Link – Remington453.7250FMNWQKE933
Jasper County Fire/EMSJasper County Fire/EMS – UHF Link – Rensellaer458.1500FMNWQKE933
Jasper County Fire/EMSJasper County Fire/EMS – UHF Link – Demotte458.3875FMNWQKE933
Jasper County Fire/EMSJasper County Fire/EMS – UHF Link – Demotte458.5875FMNWQKE933
Jasper County Fire/EMSJasper County Fire/EMS – UHF Link – Wheatfield458.7250712 DPLFMNWQKE933

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Jasper County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jasper County Fire/EMSKeener Township Fire151.3025162.2 PLFMNKXT934
Jasper County Fire/EMS Expired: Expired 9/11Remington Fire154.2050FMNKBW211
Jasper County Fire/EMSWheatfield Fire453.3500
In 458.3500
141.3 PLFMNWQGC379

EMS Dispatch

EMS Dispatch frequencies for Jasper County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jasper County Fire/EMS Expired: Expired 8/23; in use 4/25Prompt EMS – Dispatch154.3850
In 151.3025
162 DPLFMNWPMK785

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Jasper County FireCounty Fire Dispatch107942a2aD
Jasper County FireCounty Fire Operations107932a29D
Jasper County EMSCounty EMS Dispatch107922a28D

Nearest trunked radio sites

Distances are measured from the center of Milroy.

Monon · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 18 (hex 12) · NAC 6BF · about 1 mi away
Control 858.9625, 859.9625
Voice 851.475, 853.8625, 855.9625, 856.9625, 857.9625, 858.5125
Rensselaer · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 91 (hex 5B) · NAC 6BF · about 13 mi away
Control 854.9875, 859.9375
Voice 851.625, 852.75, 853.65
Lake Shafer · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 93 (hex 5D) · NAC 6B3 · about 15 mi away
Control 773.48125, 774.13125
Voice 770.10625, 771.10625, 772.25625, 772.95625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Milroy?

We do not have a fire dispatch channel listed specifically for Milroy. The county-level fire dispatch channels in the same county: Jasper County Fire/EMS 154.1450 MHz, narrow FM, 162.2 PL.

What frequency does EMS or the ambulance service use in Milroy?

We do not have a EMS dispatch channel listed specifically for Milroy. The county-level EMS dispatch channels in the same county: Jasper County Fire/EMS 154.3850 MHz, narrow FM, 162 DPL (expired).

Do fire departments and EMS use a trunked radio system in Milroy?

Yes. The county-level systems that cover Milroy are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Milroy?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Milroy?

For Milroy, start with the Monon site of Indiana Project Hoosier SAFE-T. Its control channels are 858.9625, 859.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.