Skip to content

Richland Fire and EMS Frequencies

We do not have frequencies listed specifically for Richland in Jay County, Indiana yet. Countywide channels for Jay County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Redkey (Indiana Project Hoosier SAFE-T), about 2 miles away.

About Richland Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Richland: Jay County Fire/EMS 155.2350 MHz, narrow FM, 131.8 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Jay County channels that also cover Richland

Fire Dispatch

Fire Dispatch frequencies for Jay County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jay County Fire/EMSCounty Fire Dispatch155.2350
In 150.7750
131.8 PLFMNKSF246

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Jay County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jay County Fire/EMSCounty Fireground153.7700FMNKSF246
Jay County Fire/EMSCounty EMA155.0100FMNKXH788

EMS Talk-around

EMS Talk-around frequencies for Jay County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jay County Fire/EMSEms Private Channel155.2050131.8 PLFMNKNIE481

Nearest trunked radio sites

Distances are measured from the center of Richland.

Redkey · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 23 (hex 17) · NAC 6B3 · about 2 mi away
Control 853.8875, 855.2375
Voice 851.8875, 852.9875, 853.0625, 853.3625
Security Center · Blackford County Government (IN)
Site 1 (hex 1) · about 9 mi away
Voice 151.325
Hartford City · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 53 (hex 35) · NAC 6B3 · about 11 mi away
Control 853.9375, 855.4875
Voice 852.0375, 852.3625, 852.675, 853.3375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Richland?

We do not have a fire dispatch channel listed specifically for Richland. The county-level fire dispatch channels in the same county: Jay County Fire/EMS 155.2350 MHz, narrow FM, 131.8 PL.

What scanner do I need to listen to fire and EMS in Richland?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Richland?

For Richland, start with the Redkey site of Indiana Project Hoosier SAFE-T. Its control channels are 853.8875, 855.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.