Skip to content

Bloomfield Fire and EMS Frequencies

We do not have frequencies listed specifically for Bloomfield in LaGrange County, Indiana yet. Countywide channels for LaGrange County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Lagrange (Indiana Project Hoosier SAFE-T), about 3 miles away.

About Bloomfield Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Bloomfield: LaGrange County Fire 154.3700 MHz, narrow FM, 91.5 PL. County-level ems dispatch that covers Bloomfield: LaGrange County EMS 152.3000 MHz, narrow FM, 91.5 PL; LaGrange County Hospital 155.3250 MHz, narrow FM, no tone. Trunked: Indiana Project Hoosier SAFE-T, for example LaGrange County Fire talkgroup 10884 (hex 2a84).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Bloomfield, start with the Lagrange site of Indiana Project Hoosier SAFE-T, about 3 miles away. Its control channels: 853.225, 853.425 MHz.

Data updated .

LaGrange County channels that also cover Bloomfield

Fire Dispatch

Fire Dispatch frequencies for LaGrange County
AgencyDescriptionFrequency (MHz)ToneModeFCC
LaGrange County FireFire/EMS Dispatch154.370091.5 PLFMNKTM601

Fire Ground / Tactical

Fire Ground / Tactical frequencies for LaGrange County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Johnson Township FireJohnson Township Fire – Fire Ground155.685091.5 PLFMNKYX874
Lima Township FireLima Township Fire – Command153.830091.5 PLFMNKBF233

EMS Dispatch

EMS Dispatch frequencies for LaGrange County
AgencyDescriptionFrequency (MHz)ToneModeFCC
LaGrange County EMSLaGrange County EMS – Dispatch152.300091.5 PLFMNKJJ415
LaGrange County HospitalLaGrange County Hospital – Dispatch?155.3250FMNKCW658

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
LaGrange County FireCounty Fire – East108842a84D
LaGrange County FireCounty Fire – Central108852a85D
LaGrange County FireCounty Fire – West108862a86D
LaGrange County FireFire Paging110372b1dD

Nearest trunked radio sites

Distances are measured from the center of Bloomfield.

Lagrange · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 42 (hex 2A) · NAC 6BB · about 3 mi away
Control 853.225, 853.425
Voice 851.2375, 851.7125, 851.8625, 852.8625
Ligonier · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 43 (hex 2B) · NAC 6B3 · about 18 mi away
Control 853.4875, 855.2375
Voice 851.05, 851.4875, 852.2, 852.5375
Kendallville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 20 (hex 14) · NAC 6BA · about 18 mi away
Control 853.9875, 857.2625
Voice 851.425, 851.9625, 852.475, 852.9
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Bloomfield?

We do not have a fire dispatch channel listed specifically for Bloomfield. The county-level fire dispatch channels in the same county: LaGrange County Fire 154.3700 MHz, narrow FM, 91.5 PL.

What frequency does EMS or the ambulance service use in Bloomfield?

We do not have a EMS dispatch channel listed specifically for Bloomfield. The county-level EMS dispatch channels in the same county: LaGrange County EMS 152.3000 MHz, narrow FM, 91.5 PL; LaGrange County Hospital 155.3250 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Bloomfield?

Yes. The county-level systems that cover Bloomfield are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Bloomfield?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Bloomfield?

For Bloomfield, start with the Lagrange site of Indiana Project Hoosier SAFE-T. Its control channels are 853.225, 853.425 MHz. Program a control channel first; the scanner finds the voice channels from it.