About Noble Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Noble: LaPorte County Fire 154.1600 MHz, narrow FM, 141.3 PL. County-level ems dispatch that covers Noble: LaPorte County EMS 155.2200 MHz, narrow FM, 051 DPL. Trunked: Indiana Project Hoosier SAFE-T, for example LaPorte County Fire talkgroup 12641 (hex 3161).
- 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Noble, start with the La Porte Co Simulcast site of Indiana Project Hoosier SAFE-T, about 3 miles away. Its control channels: 857.4625, 858.7125 MHz.
Data updated .
LaPorte County channels that also cover Noble
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| LaPorte County Fire | LaPorte County Fire – Dispatch (Channel 1) | 154.1600 In 159.4125 | 141.3 PL | FMN | WQQY208 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| LaPorte County Fire | LaPorte County Fire – Fire Ground (Noble) | 151.0550 In 154.2200 | 712 DPL | FMN | WQQY208 |
| LaPorte County Fire | LaPorte County Fire – Tertiary (Channel 3) | 153.3550 In 159.4275 | 141.3 PL | FMN | WQQY208 |
| LaPorte County Fire | LaPorte County Fire – Alternate (Channel 2) | 154.1600 In 155.6925 | 141.3 PL | FMN | WQQY208 |
| LaPorte County Fire | Fireground 6 Direct | 154.2400 | 051 DPL | FMN | WQQY208 |
| LaPorte County Fire | LaPorte County Fire – Mutual Aid (74.4 PL In) | 154.2800 | CSQ | FMN | WQQY208 |
| LaPorte County Fire | Fireground 7 Direct | 154.3550 | 210.7 PL | FMN | WQQY208 |
| LaPorte County Fire | Firegrounds (Differring Input Tones) | 156.2400 In 159.0450 | 051 DPL | FMN | WQQY208 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| LaPorte County EMS | LaPorte County EMS – Dispatch . | 155.2200 In 150.8050 | 051 DPL | FMN | KSO422 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| LaPorte County Fire | County Fire – Dispatch | 12641 | 3161 | D |
| LaPorte County Fire | La Porte City Fire – Dispatch | 12647 | 3167 | D |
| LaPorte County Fire | County Fireground | 12642 | 3162 | D |
| LaPorte County Fire | County Fireground | 12643 | 3163 | D |
| LaPorte County Fire | County Fireground | 12644 | 3164 | D |
| LaPorte County Fire | County Fireground | 12645 | 3165 | D |
| LaPorte County EMS | County EMS – Dispatch | 12634 | 315a | D |
| LaPorte County EMS | County EMS – Operations | 12635 | 315b | D |
| LaPorte County Hospital | County IHERN Patch to SAFE-T | 12650 | 316a | D |
Nearest trunked radio sites
Distances are measured from the center of Noble.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Noble?
We do not have a fire dispatch channel listed specifically for Noble. The county-level fire dispatch channels in the same county: LaPorte County Fire 154.1600 MHz, narrow FM, 141.3 PL.
What frequency does EMS or the ambulance service use in Noble?
We do not have a EMS dispatch channel listed specifically for Noble. The county-level EMS dispatch channels in the same county: LaPorte County EMS 155.2200 MHz, narrow FM, 051 DPL.
Do fire departments and EMS use a trunked radio system in Noble?
Yes. The county-level systems that cover Noble are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 9 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Noble?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Noble?
For Noble, start with the La Porte Co Simulcast site of Indiana Project Hoosier SAFE-T. Its control channels are 857.4625, 858.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.