Skip to content

German Fire and EMS Frequencies

We do not have frequencies listed specifically for German in Marshall County, Indiana yet. Countywide channels for Marshall County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Plymouth (Indiana Project Hoosier SAFE-T), about 11 miles away.

About German Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers German: Marshall County Fire 154.1300 MHz, narrow FM, 85.4 PL. County-level ems dispatch that covers German: Lakeville Lapaz EMS 155.1600 MHz, narrow FM, 74.4 PL; Polk Township EMS 154.4150 MHz, narrow FM, 85.4 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Marshall County Fire talkgroup 10977 (hex 2ae1).

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For German, start with the Plymouth site of Indiana Project Hoosier SAFE-T, about 11 miles away. Its control channels: 857.7125, 858.4625 MHz.

Data updated .

Marshall County channels that also cover German

Fire Dispatch

Fire Dispatch frequencies for Marshall County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Marshall County FireMarshall County Fire – Dispatch (Countywide)154.130085.4 PLFMNWQIX990

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Marshall County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Polk Township FirePolk Township Fire – Fire Ground154.4150FMNWQDZ986
Tippecanoe Township FireTippecanoe Township Fire – Operations152.4350
In 157.6950
051 DPLFMWPUH638

EMS Dispatch

EMS Dispatch frequencies for Marshall County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lakeville Lapaz EMSLakeville Lapaz EMS – Dispatch155.160074.4 PLFMNWQDZ986
Polk Township EMSPolk Township EMS – Dispatch154.415085.4 PLFMNWQDZ986
Walkerton EMSWalkerton EMS – Dispatch155.205071.9 PLFMNWQDZ986

EMS Tactical

EMS Tactical frequencies for Marshall County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Tippecanoe Township EMSTippecanoe Township EMS – Old154.5150CSQFMWZH728

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Marshall County FireMarshall County Fire – Dispatch109772ae1D
Marshall County FireMarshall County Fire – Fire Ground (County)109782ae2D
Marshall County FireMarshall County Fire – Fire Ground (County)109792ae3D
Marshall County FireMarshall County Fire – Fire Ground (County)109802ae4D
Marshall County FireMarshall County Fire – Fire Ground (County)109812ae5D
Marshall County EMSMarshall County EMS – Dispatch (County)109732addD
Marshall County EMSMarshall County EMS – Operations (County)109742adeD
Marshall County EMSMarshall County EMS – Operations (County)109752adfD
Marshall County EMSMarshall County EMS – Operations (County)109762ae0D

Nearest trunked radio sites

Distances are measured from the center of German.

Plymouth · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 40 (hex 28) · NAC 6B1 · about 11 mi away
Control 857.7125, 858.4625
Voice 851.45, 851.95, 852.2125, 852.45, 852.95, 853.95, 857.2125
St. Joseph Co Simulcast · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 2 (hex 2) · NAC 6B2 · about 15 mi away
Control 853.6875, 856.1625, 858.9875, 859.7625
Voice 851.275, 851.6125, 852.0375, 853.0375, 853.2625, 853.2875, 853.6625, 855.7375, 856.4375, 856.7625, 857.7625, 858.7625
Elkhart Co Simulcast · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 9 (hex 9) · NAC 6B9 · about 18 mi away
Control 772.55625, 772.93125
Voice 769.30625, 769.55625, 770.08125, 770.53125, 770.78125, 771.15625, 771.40625, 771.68125, 771.95625, 772.30625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in German?

We do not have a fire dispatch channel listed specifically for German. The county-level fire dispatch channels in the same county: Marshall County Fire 154.1300 MHz, narrow FM, 85.4 PL.

What frequency does EMS or the ambulance service use in German?

We do not have a EMS dispatch channel listed specifically for German. The county-level EMS dispatch channels in the same county: Lakeville Lapaz EMS 155.1600 MHz, narrow FM, 74.4 PL; Polk Township EMS 154.4150 MHz, narrow FM, 85.4 PL; Walkerton EMS 155.2050 MHz, narrow FM, 71.9 PL.

Do fire departments and EMS use a trunked radio system in German?

Yes. The county-level systems that cover German are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 9 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in German?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in German?

For German, start with the Plymouth site of Indiana Project Hoosier SAFE-T. Its control channels are 857.7125, 858.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.