About Lost River Fire and EMS Frequencies
Quick answer: Fire dispatch for Lost River: Lost River Fire 156.2175 MHz, narrow FM, 173.8 PL. County-level ems dispatch that covers Lost River: Martin County EMS 151.4000 MHz, narrow FM, 131.8 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Martin County Fire talkgroup 21503 (hex 53ff).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Lost River, start with the French Lick site of Indiana Project Hoosier SAFE-T, about 6 miles away. Its control channels: 855.9875, 857.7625 MHz.
Data updated .
Lost River conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lost River Fire | Lost River Fire – Tone-Out/Dispatch/On-Scene | 156.2175 In 159.3675 | 173.8 PL | FMN | WRAM527 |
Martin County channels that also cover Lost River
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Martin County Fire | Fire/EMA – Dispatch (Countywide) | 155.1300 In 154.8900 | CSQ | FMN | KNJJ839 |
| Martin County Fire | Martin County Fire – UHF Link (Countywide) | 453.1625 | FMN | WQAC216 | |
| Martin County Fire | Martin County Fire – UHF Link (Countywide) | 458.1625 | FMN | WQAC216 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Martin County EMS | Martin County EMS – Dispatch (Countywide) | 151.4000 In 158.7600 | 131.8 PL | FMN | WPZJ605 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Martin County EMS | Martin County EMS – Talk-Around | 155.2050 | 100.0 PL | FMN | KNJJ839 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Martin County Fire | Martin County Fire – Dispatch | 21503 | 53ff | D |
| Martin County Fire | Martin County Fire – Fire Ground | 21504 | 5400 | D |
| Martin County Fire | Martin County Fire – Fire Ground | 21505 | 5401 | D |
| Martin County Fire | Martin County Fire – Fire Ground | 21506 | 5402 | D |
| Martin County Fire | Martin County Fire – Fire Ground | 21507 | 5403 | D |
| Martin County EMS | Martin County EMS – Dispatch | 21508 | 5404 | D |
| Martin County EMS | Martin County EMS – Operations | 21495 | 53f7 | D |
Nearest trunked radio sites
Distances are measured from the center of Lost River.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Lost River?
Fire dispatch channels listed for Lost River: Lost River Fire 156.2175 MHz, narrow FM, 173.8 PL.
What frequency does EMS or the ambulance service use in Lost River?
We do not have a EMS dispatch channel listed specifically for Lost River. The county-level EMS dispatch channels in the same county: Martin County EMS 151.4000 MHz, narrow FM, 131.8 PL.
Do fire departments and EMS use a trunked radio system in Lost River?
Yes. The county-level systems that cover Lost River are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Lost River?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Lost River?
For Lost River, start with the French Lick site of Indiana Project Hoosier SAFE-T. Its control channels are 855.9875, 857.7625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Lost River fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Lost River are marked encrypted.