About Washington Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Washington: Newton County Fire 151.4675 MHz, narrow FM, 162 DPL. Trunked: Indiana Project Hoosier SAFE-T, for example Newton County EMS talkgroup 12083 (hex 2f33).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 1 talkgroup; Newton County Government (IN): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Washington, start with the Morocco site of Indiana Project Hoosier SAFE-T, about 5 miles away. Its control channels: 852.95, 853.95 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
- 1 entry is marked expired, so it may no longer be in use.
Data updated .
Newton County channels that also cover Washington
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Newton County Fire | Fire/EMS/EMA – North (Lake Village) | 151.4675 In 159.3900 | 162 DPL | FMN | WNQG217 |
| Newton County Fire | Fire/EMS/EMA – South (Goodland) | 154.0475 In 159.0075 | 156.7 PL | FMN | WQWA523 |
| Newton County Fire Unconfirmed | Fire/EMS/EMA – Central / Outdoor Warning Sirens (Enos) | 158.8050 In 153.7550 | 156.7 PL | FMN | WNQG217 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Thayer/Lincoln Township Fire Expired: Expired 8/04 | Thayer/Lincoln Township Fire – Fire Ground | 154.3550 | 156.7 PL | FMN | KWS645 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Newton County EMS | EMA/EMS – Operations (County) | 12083 | 2f33 | D |
Newton County Government (IN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Newton County Fire | Newton County Fire – Dispatch | 4 | 4 | T |
| Newton County Fire | Lincoln Township Fire – Operations | 18 | 12 | T |
| Newton County Fire | Moroco Fire – Operations | 20 | 14 | T |
| Newton County EMS | Newton County EMS – Operations | 21 | 15 | T |
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Newton County Fire | Newton County Fire – Private | 22 | 16 | T Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Washington.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Washington?
We do not have a fire dispatch channel listed specifically for Washington. The county-level fire dispatch channels in the same county: Newton County Fire 151.4675 MHz, narrow FM, 162 DPL.
Do fire departments and EMS use a trunked radio system in Washington?
Yes. The county-level systems that cover Washington are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 1 talkgroup; Newton County Government (IN): 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Washington?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Washington?
For Washington, start with the Morocco site of Indiana Project Hoosier SAFE-T. Its control channels are 852.95, 853.95 MHz. Program a control channel first; the scanner finds the voice channels from it.