Skip to content

Green Fire and EMS Frequencies

We do not have frequencies listed specifically for Green in Noble County, Indiana yet. Countywide channels for Noble County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Kendallville (Indiana Project Hoosier SAFE-T), about 8 miles away.

About Green Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Green: Noble County Fire 154.2200 MHz, narrow FM, 97.4 PL. County-level ems dispatch that covers Green: Noble County EMS 155.3250 MHz, narrow FM, 91.5 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Noble County Fire talkgroup 12100 (hex 2f44).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Green, start with the Kendallville site of Indiana Project Hoosier SAFE-T, about 8 miles away. Its control channels: 853.9875, 857.2625 MHz.

Data updated .

Noble County channels that also cover Green

Fire Dispatch

Fire Dispatch frequencies for Noble County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Noble County FireNoble County Fire – Dispatch154.220097.4 PLFMNKLO448

EMS Dispatch

EMS Dispatch frequencies for Noble County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Noble County EMSNoble County EMS – Dispatch155.3250
In 159.3700
91.5 PLFMNWPZN654

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Noble County FireNoble County Fire – Dispatch (County)121002f44D
Noble County FireNoble County Fire – Operations East (County)121012f45D
Noble County FireNoble County Fire – Operations West (County)121022f46D

Nearest trunked radio sites

Distances are measured from the center of Green.

Kendallville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 20 (hex 14) · NAC 6BA · about 8 mi away
Control 853.9875, 857.2625
Voice 851.425, 851.9625, 852.475, 852.9
Columbia City · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 47 (hex 2F) · NAC 6B7 · about 11 mi away
Control 852.4125, 853.9375
Voice 851.2125, 851.3875, 851.9125
Ligonier · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 43 (hex 2B) · NAC 6B3 · about 16 mi away
Control 853.4875, 855.2375
Voice 851.05, 851.4875, 852.2, 852.5375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Green?

We do not have a fire dispatch channel listed specifically for Green. The county-level fire dispatch channels in the same county: Noble County Fire 154.2200 MHz, narrow FM, 97.4 PL.

What frequency does EMS or the ambulance service use in Green?

We do not have a EMS dispatch channel listed specifically for Green. The county-level EMS dispatch channels in the same county: Noble County EMS 155.3250 MHz, narrow FM, 91.5 PL.

Do fire departments and EMS use a trunked radio system in Green?

Yes. The county-level systems that cover Green are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Green?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Green?

For Green, start with the Kendallville site of Indiana Project Hoosier SAFE-T. Its control channels are 853.9875, 857.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.